We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS HD SFF8088 connector splitting into four SATA 7pin cables

SMUGDESK

SMUGDESK Mini SAS HD SFF8088 to 4×SATA 7Pin Cable

SKU CH-5VJ1-CB6W9

Connects an external SFF-8088 port to four SATA drives at 6 Gbps with lengths of .5, 1, 2 or 3 metres

  • Converts one SFF-8088 port to four SATA drives
  • Steady 6Gbps bandwidth keeps RAID arrays running smoothly
  • Choose .5m 1m 2m or 3m for any chassis layout
  • Shielded harness cuts interference for nonstop enterprise operation
  • Works with servers JBOD enclosures RAID cards and workstations

External SFF8088 to SATA fanout cable

This Mini SAS HD breakout cable converts a single SFF8088 port into four SATA 7pin connectors for multidrive storage expansion. It supports 6Gbps bandwidth for SATA HDDs and SSDs in server, workstation and JBOD enclosure deployments. Available in four length options from 0.5m to 3m for flexible internal or external routing. Shielded construction reduces signal interference during continuous enterprise operation.

Suits RAID arrays and multi‑drive servers

Builders expanding a RAID controller or external storage chassis with SATA drives will find the four‑port fanout and 6Gbps throughput match their needs. The range of cable lengths accommodates both short internal chassis runs and longer external data‑center links. Systems that require a native SAS wide port or direct PCIe drive connections cannot use this SATA breakout.

Single SFF8088 port feeds four SATA 7pin drives

The defining specification is the 4port breakout design that splits one external Mini SAS HD SFF8088 interface into four standard SATA 7pin data paths. This layout determines whether the cable fits the controller port and drive count in your storage topology. Verify the host side presents an SFF8088 connector before ordering.

Highlights

  • Converts one SFF-8088 port to four SATA drives
  • Steady 6Gbps bandwidth keeps RAID arrays running smoothly
  • Choose .5m 1m 2m or 3m for any chassis layout
  • Shielded harness cuts interference for nonstop enterprise operation
  • Works with servers JBOD enclosures RAID cards and workstations

Specifications

No published specifications for this item yet.

Questions about this item

Which cable length — 0.5m, 1m, 2m or 3m — fits my server chassis?

Choose the shortest length that reaches from the external SFF8088 port to the four SATA drives without strain; 0.5m suits tight internal routing, while 2m or 3m span full rack depth.

What does the 6Gbps rating deliver when the cable is installed?

It provides a steady 6Gbps link per SATA lane, so each connected HDD or SSD can transfer at its native SATA III speed during RAID rebuilds or heavy workloads.

Will the SFF8088 connector work with my SAS controller?

The SFF8088 Mini SAS HD plug matches the external port found on most SAS RAID controllers and HBA cards, giving a direct four‑drive SATA fan‑out.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.