We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flat Mini SAS HD SFF8088 to SFF8644 cable, 2m

SMUGDESK

SMUGDESK Mini SAS HD SFF8088 26Pin to SFF8644 2M SAS Cable

SKU CH-09VS-A5H7X

Connects external SFF-8088 and SFF-8644 ports for server-to-storage expansion with 6Gbps SAS bandwidth

  • Connects SFF8088 to SFF8644 for server-to-storage expansion
  • 28AWG copper conductors deliver stable 6Gbps SAS bandwidth
  • Black flat connector design saves space in rack environments
  • Two-metre length enables flexible long-distance rackmount deployments
  • Rugged shielding minimises interference for enterprise-grade reliability

Mini SAS HD SFF8088 to SFF8644 cable

This Mini SAS HD cable connects an SFF8088 26pin port to an SFF8644 interface for external server and storage array interconnection. It is built for IT professionals expanding enterprise storage systems or stacking rackmount servers. The 2meter length supports flexible placement between equipment racks. The flat black connector profile keeps external wiring tidy in dense deployments.

Upgrading from older SAS interconnects

The cable replaces legacy stacking links that cannot sustain 6Gbps bandwidth across longer runs. The jump is worth it when current cabling limits throughput between RAID controllers and drive enclosures. Premium 28AWG copper conductors reduce signal loss so the full 6Gbps rate remains stable. Rugged shielding cuts interference that degrades performance in busy data centre aisles.

Installation notes and common issues

The flat connector design eases routing through tight cable management arms and rack channels. Ensure both ends seat fully; a loose SFF8088 or SFF8644 latch causes intermittent link errors. Verify the host controller and target enclosure both negotiate 6Gbps, otherwise the link falls back to a lower speed. Avoid sharp bends near the moulded strain relief to preserve longterm signal integrity.

Highlights

  • Connects SFF8088 to SFF8644 for server-to-storage expansion
  • 28AWG copper conductors deliver stable 6Gbps SAS bandwidth
  • Black flat connector design saves space in rack environments
  • Two-metre length enables flexible long-distance rackmount deployments
  • Rugged shielding minimises interference for enterprise-grade reliability

Specifications

No published specifications for this item yet.

Questions about this item

Will the SFF8088 end fit my external 26-pin Mini SAS HD port?

Yes, the cable terminates in a standard SFF8088 26-pin Mini SAS HD connector that mates with any compliant external 26-pin port on a server or HBA.

Do I need tools to connect the flat black SFF8644 plug, or does it latch by hand?

Both ends use push-pull latching; align the key and press until the connector clicks — no screws or tools are required, but verify the latch is fully seated on the SFF8644 side.

When should I plan to replace this 28AWG SAS cable in a 6Gbps storage link?

Inspect the shielding and connector pins during routine rack maintenance; replace the cable if you see sheath damage, bent pins, or intermittent link errors on the 6Gbps SAS channel.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.