We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
0.5 m Mini SAS HD SFF8087 right-angle to four right-angle SATA 7-pin cable

SMUGDESK

SMUGDESK Mini SAS HD SFF8087 RightAngle to 4x RightAngle SATA 7Pin 0.5M 12Gbps 30AWG

SKU CH-814K-V6YZR

Right-angle SFF-8087 to four right-angle SATA 7-pin breakout cable, .5 m, 30 AWG copper, 12 Gbps SAS/SATA

  • Right-angle SFF-8087 to four right-angle SATA 7-pin for space-optimized server routing
  • 30AWG pure copper harness delivers stable 12Gbps high-speed SAS/SATA signal transmission
  • Dual right-angle connector design maximizes space efficiency in compact server chassis
  • 5M short length ideal for close-proximity multi-drive connections in small-form-factor servers
  • Server-grade shielded construction minimizes electromagnetic interference for reliable enterprise operation

Compact SAS breakout cable

This new SMUGDESK internal cable breaks a single Mini SAS HD SFF8087 port into four SATA 7-pin connections. Both ends use right-angle plugs to keep routing tidy inside dense server chassis and storage backplanes. The 0.5 metre length suits close-proximity multi-drive layouts in small-form-factor systems.

Suits tight enterprise builds

Builders assembling compact RAID arrays or high-capacity NAS units gain space-efficient 12Gbps connectivity without cable clutter. The dual right-angle design and 30AWG copper harness fit restricted bays where straight connectors would obstruct airflow or adjacent cards. Installations needing straight connectors, longer reach between chassis zones, or different pin counts should look at other cable types.

12Gbps bandwidth rating

The cable is specified for 12Gbps SAS/SATA signal transmission across its 30AWG copper conductors. This bandwidth ceiling determines whether the link can saturate modern enterprise drives and RAID controllers in the target deployment.

Highlights

  • Right-angle SFF-8087 to four right-angle SATA 7-pin for space-optimized server routing
  • 30AWG pure copper harness delivers stable 12Gbps high-speed SAS/SATA signal transmission
  • Dual right-angle connector design maximizes space efficiency in compact server chassis
  • 5M short length ideal for close-proximity multi-drive connections in small-form-factor servers
  • Server-grade shielded construction minimizes electromagnetic interference for reliable enterprise operation

Specifications

No published specifications for this item yet.

Questions about this item

Does the SFF-8087 interface on this cable support 12Gbps SAS speeds?

Yes, the SFF-8087 connector is rated for 12Gbps bandwidth, matching the 30AWG copper harness specification for high-speed SAS or SATA signal transmission.

What clearance is needed for the right-angle connectors on both ends?

Both the SFF-8087 plug and the four SATA 7-pin plugs use a right-angle profile, so they sit flush against the chassis wall or backplane and need only minimal side clearance in dense servers.

How do I avoid signal issues when routing this 0.5M breakout cable?

Keep the shielded 30AWG harness away from high-current power leads, seat each right-angle latch fully until it clicks, and do not bend the cable tighter than its natural curve near the connectors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.