We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 32-inch internal SAS cable with SFF-8643 connectors and locking latches

SMUGDESK

SMUGDESK Mini SAS HD SFF-8643 to SFF-8643 Cable 32" 12Gbps SAS 3.0

SKU CH-2B1S-AMAHG

Internal 12Gbps SAS 3.0 cable with SFF-8643 connectors, 32 inches long, locking latches and shielding for RAID controllers and server backplanes

  • 12 Gbps SAS 3.0 speed for fast storage throughput
  • SFF-8643 connectors link RAID controllers to server backplanes
  • 32 inch length keeps internal cabling tidy
  • Locking latches prevent accidental unplugging under vibration
  • Multi-layer shielding maintains signal integrity during 24/7 operation

SAS 3.0 Internal Cable

This SMUGDESK Mini SAS HD cable provides a 12Gbps data link between RAID controllers, HBA adapters and server backplanes. It uses dual SFF-8643 connectors and measures 32 inches (81cm) for tidy routing inside mid-size and large chassis. Multi-layer shielding preserves signal integrity under continuous 24/7 load. Locking latches prevent accidental disconnection from vibration.

For SAS Storage Builds

The cable suits administrators wiring SAS or SATA drives to LSI/Broadcom RAID or HBA cards in enterprise servers, NAS units and disk arrays. It is not for external connections or installations that require a different connector type or longer reach. Buyers needing alternative interfaces or cable lengths must select a different product.

12Gbps SAS 3.0 Speed

The single specification that decides fit is the SAS 3.0 rating delivering up to 12Gbps throughput over the SFF-8643 interface. Verify that your controller, backplane and drives all support this standard before purchasing.

Highlights

  • 12 Gbps SAS 3.0 speed for fast storage throughput
  • SFF-8643 connectors link RAID controllers to server backplanes
  • 32 inch length keeps internal cabling tidy
  • Locking latches prevent accidental unplugging under vibration
  • Multi-layer shielding maintains signal integrity during 24/7 operation

Specifications

No published specifications for this item yet.

Questions about this item

What connectors must my RAID controller or backplane have to use this SFF-8643 cable?

Both ends use SFF-8643 Mini SAS HD connectors, so the controller, HBA, or backplane must each provide a matching SFF-8643 port.

Will this 12Gbps cable work with my existing 6Gbps SAS or SATA drives?

Yes, the SAS 3.0 link negotiates down to 6Gbps, so 6Gbps SAS and SATA drives operate normally through the cable.

How can I verify the link is running at 12Gbps after installation?

Check the controller BIOS or management utility; it will report a negotiated speed of 12Gbps per lane when the cable, controller, and drives all support SAS 3.0.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.