We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short blue cable with SFF-8643 and SFF-8087 connectors

SMUGDESK

SMUGDESK Mini SAS HD SFF-8643 to SFF-8087 Cable .5m 1.6ft

SKU CH-J6J6-T69NH

Connects Mini SAS HD RAID controllers to SFF-8087 backplanes with .5m shielded cable for reliable internal data transfer

  • Connects Mini SAS HD controllers to SFF-8087 backplanes for internal storage
  • .5m length keeps server chassis wiring tidy and organised
  • Multi-layer shielding blocks electromagnetic interference for stable data transfer
  • Precision-molded connectors prevent loose contacts during continuous operation
  • Compatible with mainstream RAID adapters and server storage devices

Internal SAS cable for server storage

This 0.5 metre Mini SAS HD cable connects an SFF-8643 RAID controller to an SFF-8087 hard drive backplane inside a server chassis. It is built for administrators and integrators who need a short, shielded link for internal storage arrays. The compact length keeps cable routing tidy in dense enclosures.

Replaces worn or mismatched internal links

Use this cable when an existing internal SAS connection has degraded, when a controller upgrade changes the port type from SFF-8087 to SFF-8643, or when a storage rebuild demands a precise short run. The jump is worth it when signal integrity errors appear or when a new RAID adapter requires the Mini SAS HD interface.

Verify controller and backplane port types

Before ordering, confirm that the RAID adapter presents an SFF-8643 Mini SAS HD port and the target backplane or expander uses an SFF-8087 connector. Check that the 0.5 metre reach spans the internal distance without strain. This cable is for internal use only and will not suit external storage connections.

Highlights

  • Connects Mini SAS HD controllers to SFF-8087 backplanes for internal storage
  • .5m length keeps server chassis wiring tidy and organised
  • Multi-layer shielding blocks electromagnetic interference for stable data transfer
  • Precision-molded connectors prevent loose contacts during continuous operation
  • Compatible with mainstream RAID adapters and server storage devices

Specifications

No published specifications for this item yet.

Questions about this item

What connector spacing does the SFF-8643 end require on the RAID controller?

The SFF-8643 Mini SAS HD plug follows the standard high-density pinout used by current RAID adapters; it mates directly with any controller port labelled SFF-8643.

Which orientation do the SFF-8643 and SFF-8087 plugs need during installation?

Both connectors are keyed; align the notch on each plug with the slot on the port and press straight in until the latch clicks — forcing it sideways bends pins.

When should the cable be replaced in a running server?

Replace it if the latch no longer holds, if you see bent pins inside either connector, or if the RAID controller logs recurring CRC errors on the attached backplane.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.