We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS HD SFF-8643 to four right-angle SATA cables, 50cm length

SMUGDESK

SMUGDESK Mini SAS HD SFF-8643 to 4 Right Angle SATA Cable 50cm

SKU CH-9WWS-PNR9E

Converts one SFF-8643 Mini SAS HD port into four right-angle SATA connections for server storage expansion

  • Converts one Mini SAS HD SFF-8643 port into four SATA channels for storage expansion
  • Right-angle SATA connectors save chassis space and prevent cable bending stress on interfaces
  • 50cm cable length fits standard server layouts and improves internal airflow
  • High-purity copper conductors with multi-layer shielding support stable 24/7 server operation
  • Compatible with RAID cards, SAS controllers, servers, NAS, SATA HDDs and SSDs

Server Storage Expansion Cable

The SMUGDESK Mini SAS HD SFF-8643 to 4 Right Angle SATA Cable connects a single SFF-8643 port to four SATA drives, enabling internal storage expansion for servers and RAID systems. High-purity copper conductors and multi-layer shielding support stable 24/7 operation. The 50cm length fits standard server chassis layouts.

Right-Angle Design for Dense Builds

This cable suits administrators expanding storage in space-constrained server or NAS enclosures where straight SATA plugs would obstruct airflow or stress ports. The 90-degree connectors prevent bending damage and simplify cable routing. Builders needing a different Mini SAS interface or straight SATA plugs should look elsewhere.

SFF-8643 Mini SAS HD Interface

The cable requires a controller or backplane with an SFF-8643 Mini SAS HD port to function. Without this specific connector, the cable cannot be used. Verify the host side matches SFF-8643 before purchase.

Highlights

  • Converts one Mini SAS HD SFF-8643 port into four SATA channels for storage expansion
  • Right-angle SATA connectors save chassis space and prevent cable bending stress on interfaces
  • 50cm cable length fits standard server layouts and improves internal airflow
  • High-purity copper conductors with multi-layer shielding support stable 24/7 server operation
  • Compatible with RAID cards, SAS controllers, servers, NAS, SATA HDDs and SSDs

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the Mini SAS HD SFF-8643 cable is working after connecting four SATA drives?

The system BIOS or RAID controller should detect all four attached SATA HDDs or SSDs and show stable link speeds during POST or in the management utility.

What comes in the box and do I need anything else to connect the drives?

The cable itself converts one SFF-8643 port into four right-angle SATA connectors; SATA power leads from the server power supply are required separately for each drive.

Which version of this cable should I choose for a standard server chassis?

The 50 cm length with 90-degree SATA plugs is tailored for mainstream server cases and matches the SFF-8643 interface on compatible RAID cards.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.