We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SFF-8643 Mini SAS HD plug splitting into four left-angled SATA connectors on shielded cable

SMUGDESK

SMUGDESK Mini SAS HD SFF-8643 to 4 Port Left-Angle SATA Cable

SKU CH-2XFM-SRKNR

Connects a Mini SAS HD SFF-8643 port to four left-angle SATA drives, saving space in tight server chassis while maintaining stable 24/7 signal transmission

  • Connects RAID controller to four SATA drives
  • Left-angle connectors save space in tight chassis
  • Shielded wire reduces interference for 24/7 operation
  • Molded latch design prevents loose connections under vibration
  • Compatible with SATA 2.0 and SATA 3.0 drives

Mini SAS HD SFF-8643 Breakout Cable

This internal cable converts a single SFF-8643 Mini SAS HD port into four independent SATA connections for hard drives or solid-state drives. It is built for servers, workstations and DIY storage systems that attach multiple drives to a RAID controller or storage expansion card. The design suits administrators wiring dense drive arrays inside compact chassis.

Left-Angle SATA Connectors

Each of the four SATA plugs uses a left-angle moulding that routes the wire parallel to the drive body instead of projecting straight out. This geometry removes the sharp bends that damage conductors in tight server bays and prevents the connector from fouling adjacent components. The angled shape is the specific feature that makes the cable usable where straight plugs will not fit.

Shielded for Continuous Server Load

High-density shielding suppresses electromagnetic interference from power supplies and motherboards to maintain stable data transmission during 24/7 operation. Precision-moulded connectors with a secure latch resist vibration-induced disconnection over long periods. The assembly is rated for SATA 2.0 and SATA 3.0 drives, ensuring sustained throughput without signal degradation under heavy, constant workloads.

Highlights

  • Connects RAID controller to four SATA drives
  • Left-angle connectors save space in tight chassis
  • Shielded wire reduces interference for 24/7 operation
  • Molded latch design prevents loose connections under vibration
  • Compatible with SATA 2.0 and SATA 3.0 drives

Specifications

No published specifications for this item yet.

Questions about this item

What does a single SFF-8643 connection provide for my drives?

It breaks out one SFF-8643 Mini SAS HD port into four separate SATA ports so you can attach up to four SATA hard drives or SSDs to the same RAID controller lane.

Which SATA standards does the cable support and what speed does that limit me to?

The cable works with SATA 2.0 and SATA 3.0 drives, so each connected drive runs at up to the SATA 3.0 ceiling of 6 Gbps.

How much clearance do the left-angle SATA plugs need behind the drive?

The left-angle design lets each SATA connector sit flush against the drive edge, so you only need the few millimetres of space that a standard right-angle plug requires.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.