We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two cables, each with a 36-pin SFF8087 plug splitting to four SFF8482 connectors with SATA power leads

SMUGDESK

SMUGDESK Mini SAS 36Pin SFF8087 to 4×SFF8482 SATA Power Cable 1M 2Pack

SKU CH-8HER-NH6D5

A 2-pack of 1 m breakout cables that split one SFF-8087 port into four SFF-8482 connectors with integrated SATA power for SAS/SATA drives

  • 2-pack value set for server storage replacement and bulk deployment
  • Single 36-pin SFF8087 port breaks out to four SFF8482 SAS/SATA drive connectors
  • Integrated SATA power delivery powers HDD/SSD without extra power cables
  • High-speed stable transmission for enterprise RAID controllers and storage backplanes
  • 1-metre length for flexible internal server wiring with durable anti-interference shielding

Server storage breakout cable

This two-pack breakout cable converts a single 36-pin SFF8087 Mini SAS port into four SFF8482 connectors with integrated SATA power. It targets administrators expanding internal storage in rackmount servers or NAS enclosures. Each assembly carries both data and drive power, removing the need for separate power cables. The 1 metre length suits typical chassis routing.

Sustained data and power delivery

High-quality conductors and anti-interference shielding maintain stable bandwidth during continuous RAID array rebuilds or bulk data migrations. The integrated SATA power lines feed each attached HDD or SSD without voltage drop over the full cable run. Enterprise controllers see consistent throughput because the combined data and power path is shielded end-to-end.

SAS SFF8087 interface limits

The SFF8087 link aggregates four lanes, so total throughput cannot exceed the controller's native lane speed. Each SFF8482 drive port negotiates independently, but the upstream port remains the bottleneck. Builders needing more than four drives per controller must add another HBA or use a backplane with an expander.

Highlights

  • 2-pack value set for server storage replacement and bulk deployment
  • Single 36-pin SFF8087 port breaks out to four SFF8482 SAS/SATA drive connectors
  • Integrated SATA power delivery powers HDD/SSD without extra power cables
  • High-speed stable transmission for enterprise RAID controllers and storage backplanes
  • 1-metre length for flexible internal server wiring with durable anti-interference shielding

Specifications

No published specifications for this item yet.

Questions about this item

Does the 36-pin SFF8087 cable run hot or draw extra power when drives are active all day?

The cable is passive wiring with integrated SATA power, so it adds no active heat or power draw beyond what the connected drives consume.

What controller port and drive bays must already be present to use this SFF8087 to four SFF8482 breakout?

You need a free SFF8087 port on your RAID controller or backplane and four drive bays that accept SFF8482 SAS/SATA connectors.

Will the 1-metre length and SFF8482 ends work with older 3 Gb/s SAS or SATA drives I already own?

Yes, the SFF8482 interface is backward compatible with earlier SAS and SATA speeds, so legacy drives will function at their rated rates.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.