We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact M.2 NVMe to USB-C adapter with JMS583 chip, supports 2230 to 2280 SSDs

SMUGDESK

SMUGDESK M.2 NVMe to USB 3.1 Type-C Adapter JMS583 10Gbps 2230-2280

SKU CH-2F45-GQ6PK

Connects M.2 NVMe SSDs (2230, 2242, 2260, 2280) via USB 3.1 Type-C at 10Gbps using the JMS583 chip

  • JMS583 chip delivers stable 10 Gbps performance
  • USB 3.1 Type-C interface enables 10 Gbps transfer speeds
  • Fits 2230, 2242, 2260 and 2280 NVMe SSDs
  • Plug-and-play design turns internal SSD into portable storage
  • Compact build suits daily data transfer needs

SMUGDESK M.2 NVMe to USB 3.1 Type-C Adapter

This adapter connects an M.2 NVMe solid-state drive to a host device using a USB 3.1 Type-C port. It is designed for users who need to access or clone data from internal NVMe modules without installing them inside a computer chassis. The JMS583 controller manages the link between the drive and the USB interface. It suits technicians, enthusiasts and anyone repurposing spare NVMe storage as a portable drive.

Thermals noise and power draw in normal use

The unit draws power directly from the USB bus and has no active cooling, so it operates silently. Heat generated by the controller and the installed SSD dissipates through the metal casing during sustained transfers. Under typical workloads the adapter remains within safe operating temperatures without requiring external airflow. Power consumption scales with the specific NVMe module in use and the host port's current limit.

What the bundled accessories

The package includes a short USB Type-C cable for immediate connection to compatible ports. No proprietary drivers or management utilities are supplied; the adapter relies on native operating-system support for NVMe over USB. A small screwdriver is provided to secure the M.2 screw for 2230, 2242, 2260 or 2280 form-factor drives. These items enable tool-assisted installation and plug-and-play operation across Windows, macOS and Linux.

Highlights

  • JMS583 chip delivers stable 10 Gbps performance
  • USB 3.1 Type-C interface enables 10 Gbps transfer speeds
  • Fits 2230, 2242, 2260 and 2280 NVMe SSDs
  • Plug-and-play design turns internal SSD into portable storage
  • Compact build suits daily data transfer needs

Specifications

No published specifications for this item yet.

Questions about this item

How do I install an M.2 NVMe SSD into this adapter?

Slide the SSD into the M-key slot at a slight angle, press it down, and secure it with the supplied screw — the step most people miss is using the correct standoff for 2230, 2242, 2260 or 2280 lengths so the board sits flat.

Will the JMS583 chip or USB 3.1 Type-C port need replacement later?

The JMS583 controller and Type-C connector are solid-state with no moving parts; they do not wear out, so no scheduled maintenance or component replacement is required.

What limits sustained transfer speed on this adapter?

The USB 3.1 Type-C interface caps throughput at 10 Gbps, so even the fastest NVMe drive will hit that ceiling during long sequential reads or writes.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.