We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with gold M.2 slot and SATA connector

SMUGDESK

SMUGDESK M.2 NGFF SATA 3.0 to 7Pin SATA III Adapter Card 2.5

SKU CH-YQJR-EBVSK

Converts an M.2 NGFF SATA SSD to a standard 7-pin SATA III interface for data transfer and hardware upgrades

  • Converts M.2 NGFF SATA SSDs to standard SATA interface
  • Supports SATA III 6Gbps bandwidth for stable read/write performance
  • Driver-free plug-and-play installation under mainstream operating systems
  • Designed exclusively for M.2 NGFF SATA protocol drives — not NVMe
  • Compact PCB layout suits DIY hardware projects and storage upgrades

Adapter purpose

This SMUGDESK adapter card converts an M.2 NGFF SATA solid-state drive to a standard 7-pin SATA III interface, letting you install the drive in any system with a regular SATA port. It is intended for builders who want to reuse an M.2 SATA SSD in a desktop, enclosure or industrial chassis that lacks an M.2 slot.

Compatibility check

Before ordering, verify that your M.2 SSD uses the SATA protocol and carries the NGFF key notch; the board does not support NVMe or PCIe M.2 drives. Also confirm that the host device provides a standard SATA data connection and can supply power to a 2.5-inch form-factor drive.

Build integration

The compact PCB plugs directly into a SATA data cable and fits alongside 2.5-inch drive bays, so it needs no extra brackets or drivers. It frees up an M.2 slot on boards that have one, while letting older SATA-only platforms make use of modern M.2 SATA storage.

Highlights

  • Converts M.2 NGFF SATA SSDs to standard SATA interface
  • Supports SATA III 6Gbps bandwidth for stable read/write performance
  • Driver-free plug-and-play installation under mainstream operating systems
  • Designed exclusively for M.2 NGFF SATA protocol drives — not NVMe
  • Compact PCB layout suits DIY hardware projects and storage upgrades

Specifications

No published specifications for this item yet.

Questions about this item

Does the adapter include the M.2 NGFF SATA SSD or mounting screws?

The adapter card is sold alone; the M.2 NGFF SATA SSD and any mounting hardware must be purchased separately.

How do I know if my M.2 drive will work with this SATA 3.0 adapter?

The card only accepts M.2 NGFF SATA protocol drives; NVMe or PCIe M.2 SSDs are not supported.

What real-world speed can I expect from the SATA III 6Gbps link?

The adapter passes the full SATA III 6Gbps bandwidth, so the SSD delivers its rated sequential read and write performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.