SMUGDESK
SMUGDESK M.2 NGFF B Key to 2.5 Inch SATA 3 SSD Adapter Card with Protective Enclosure
Converts a SATA-based M.2 B Key SSD into a 2.5-inch SATA 3 drive with a protective enclosure for desktop or laptop upgrades
- Converts M.2 B Key SATA SSD to standard 2.5-inch SATA 3 interface
- Protective casing shields drive from dust, drops and aids passive heat dissipation
- Supports SATA 3.0 6Gbps bandwidth for reliable high-speed data transfer
- Plug-and-play installation works without drivers on Windows and Linux systems
- Enables M.2 SSD use in desktop PCs, laptops and 2.5-inch drive bays
What this adapter does
The SMUGDESK board converts an M.2 NGFF B Key SSD that uses the SATA protocol into a standard 2.5-inch SATA 3 drive. It lets you install a compact M.2 module into desktops, laptops or drive cages that only offer 2.5-inch SATA bays. The package includes a matched plastic enclosure that shields the circuit board and SSD from dust, impact and static. No driver is required for Windows or Linux systems.
Sustained data behaviour
The adapter is fully compliant with the SATA 3.0 6Gbps bandwidth standard, so read and write speeds remain consistent during long transfers. Because the M.2 SSD itself runs on the SATA protocol, throughput never exceeds the SATA III ceiling. The passive design adds no controller overhead, so performance mirrors the bare drive under continuous workloads.
Thermals, noise and power
The plastic housing acts as a passive heatsink, helping to spread heat from the M.2 SSD during extended use. With no fan or active components, the adapter adds zero audible noise to the system. Power draw is limited to the SSD itself, supplied through the standard SATA power connector, so the assembly does not increase the overall power budget.
Highlights
- Converts M.2 B Key SATA SSD to standard 2.5-inch SATA 3 interface
- Protective casing shields drive from dust, drops and aids passive heat dissipation
- Supports SATA 3.0 6Gbps bandwidth for reliable high-speed data transfer
- Plug-and-play installation works without drivers on Windows and Linux systems
- Enables M.2 SSD use in desktop PCs, laptops and 2.5-inch drive bays
Specifications
No published specifications for this item yet.
Questions about this item
Does the plastic enclosure help keep the SSD cool when it runs all day?
The casing provides passive heat auxiliary dissipation to help avoid overheating during long-time operation.
What cables do I already need to connect this adapter to my motherboard?
You will need a standard SATA data cable and a SATA power cable from your power supply.
Can I use this adapter with an older laptop that only has a 2.5-inch SATA bay?
Yes, the adapter converts the M.2 NGFF B Key SSD to a 2.5-inch SATA 3 form factor that fits legacy drive bays.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114708BTC
In stock
