We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with M.2 edge connector and two SATA ports

SMUGDESK

SMUGDESK M.2 A+E Key 2230 to Dual SATA 3.0 6Gbps Adapter

SKU CH-TGAC-C01NK

Adds two SATA 3.0 6Gbps ports via an unused M.2 A+E Key 2230 slot for extra storage drives

  • Adds two SATA 3.0 ports via unused M.2 A+E 2230 slot
  • Each port delivers SATA 3.0 6Gbps bandwidth for SSD or HDD
  • Fits M.2 A+E slot without occupying a PCIe expansion slot
  • Works driver-free on Windows desktop systems
  • Solves storage expansion when onboard SATA ports are full

M.2 A+E Key 2230 Storage Expansion

This adapter converts an unused motherboard M.2 A+E Key 2230 slot into two independent SATA 3.0 ports for desktop storage expansion. It targets builders who have exhausted onboard SATA connectors and need additional drive connections without consuming a PCIe slot. The card supports standard 2.5 inch SSDs, HDDs and SATA optical drives for extra capacity.

Build Integration and Slot Requirements

The board plugs directly into the M.2 A+E Key slot typically reserved for Wi-Fi or Bluetooth modules, leaving traditional PCIe expansion slots free for other cards. Each connected drive requires its own SATA data cable and a SATA power connection from the power supply, neither of which are included. The adapter is strictly limited to M.2 A+E Key slots and will not function in M Key, B Key or B+M Key M.2 interfaces.

Sustained Operation Characteristics

Hardware-based signal conversion operates without driver installation on mainstream Windows desktop systems, providing consistent SATA 3.0 6Gbps bandwidth per port during extended transfers. The adapter does not implement RAID functionality; any array capability depends entirely on the motherboard chipset. Removing an existing M.2 wireless module is necessary before installation, which eliminates Wi-Fi and Bluetooth from that slot.

Highlights

  • Adds two SATA 3.0 ports via unused M.2 A+E 2230 slot
  • Each port delivers SATA 3.0 6Gbps bandwidth for SSD or HDD
  • Fits M.2 A+E slot without occupying a PCIe expansion slot
  • Works driver-free on Windows desktop systems
  • Solves storage expansion when onboard SATA ports are full

Specifications

No published specifications for this item yet.

Questions about this item

What bandwidth limit appears first when both SATA 3.0 6Gbps ports are driven continuously?

Each port caps at SATA 3.0 6Gbps theoretical bandwidth, so sustained transfers on both drives simultaneously cannot exceed that per-port ceiling.

How much heat or extra power does the adapter add when running all day?

The small-form-factor board draws minimal power from the M.2 A+E slot and adds negligible heat inside the chassis.

Which cables and power connections must I already have to attach two drives?

You need two SATA data cables plus two SATA power leads from your PSU; neither is included with the adapter.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.