We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
1.0 metre Mini SAS SFF-8087 to four SATA 7Pin cable

SMUGDESK

SMUGDESK Internal Mini SAS SFF-8087 to 4 SATA 7Pin Cable 1.0m 6Gbps

SKU CH-9XMV-QGZ17

Connects one Mini SAS port to four SATA drives at 6Gbps for server storage expansion

  • Connects four SATA drives to one Mini SAS port
  • Delivers 6Gbps bandwidth compliant with SATA III standard
  • 0 metre length suits server chassis and storage cabinets
  • Multi-layer shielding cuts electromagnetic interference for error-free transfer
  • Built for 24/7 operation in RAID, NAS and industrial systems

Server Storage Expansion

This 1.0-metre internal cable converts a single Mini SAS SFF-8087 host port into four independent SATA 7Pin connections. It allows administrators to attach up to four SATA hard drives or SSDs to one RAID controller port. The design targets server, NAS and industrial storage builds that require dense drive connectivity.

Four-Drive Consolidation

The assembly replaces four separate SATA cables running from a controller to individual drives. Consolidation reduces cable clutter inside the chassis and simplifies routing in tight enclosures. The jump is worthwhile when a RAID card or HBA exposes Mini SAS ports but the storage devices use native SATA interfaces.

Connector and Length Check

Verify that the host controller presents an SFF-8087 Mini SAS receptacle and that each target drive uses a standard SATA 7Pin data connector. Confirm the 1.0-metre reach suits the path from the controller slot to the furthest drive bay. Ensure the system supports SATA III 6Gbps operation to match the cable rating.

Highlights

  • Connects four SATA drives to one Mini SAS port
  • Delivers 6Gbps bandwidth compliant with SATA III standard
  • 0 metre length suits server chassis and storage cabinets
  • Multi-layer shielding cuts electromagnetic interference for error-free transfer
  • Built for 24/7 operation in RAID, NAS and industrial systems

Specifications

No published specifications for this item yet.

Questions about this item

What host connector and target connectors does this cable use?

The cable has an SFF-8087 male host connector that splits into four separate SATA 7Pin target connectors.

How do I install this cable and what step is often missed?

Connect the SFF-8087 end to the RAID controller port, then attach each SATA 7Pin plug to a drive; the step often missed is fully seating every SATA connector so the latch clicks.

What maintenance or replacement will this cable need later?

No scheduled maintenance is required; replace the cable only if the jacket is damaged, connectors loosen, or data errors appear after long-term 24/7 use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.