We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular PoE splitter with Micro USB and Ethernet ports

SMUGDESK

SMUGDESK IEEE 802.3af PoE Splitter 48V to 5V 2.4A Micro USB Adapter

SKU CH-61HD-MSV15

Converts IEEE 802.3af PoE 48V input to 5V 2.4A Micro USB power for Raspberry Pi, Dropcam and tablets

  • IEEE 802.3af compliant active splitter ensures safe power delivery
  • Converts 48V PoE input to regulated 5V 2.4A Micro USB output
  • Separates power and data for stable device operation
  • Built-in overvoltage, overcurrent and short-circuit protection safeguards hardware
  • Compact design simplifies IoT and smart home installations

IEEE 802.3af PoE Splitter for Micro USB Devices

This active splitter converts a standard 48V Power over Ethernet input into a regulated 5V 2.4A output delivered through a Micro USB connector. It separates power from the data signal, allowing compatible hardware to receive both electricity and network connectivity over a single cable. The unit complies with the IEEE 802.3af specification and includes built-in protection against overvoltage, overcurrent and short circuits.

Ideal for Raspberry Pi and IoT Deployments

The adapter suits makers and integrators powering Raspberry Pi 2 or 3B+ boards, Dropcam units, tablets or other Micro USB devices in locations without convenient mains sockets. It is not intended for hardware requiring higher voltages, greater current or alternative connectors such as USB-C or barrel jacks. Buyers needing passive splitting or non-standard PoE voltages should look elsewhere.

Stable Output Under Continuous Operation

Designed for sustained loads typical of always-on embedded systems, the splitter maintains a steady 5V rail while passing Ethernet data uninterrupted. Internal safeguards activate automatically if the connected draw exceeds safe limits or a fault occurs, protecting both the source equipment and the end device during long-term deployment.

Highlights

  • IEEE 802.3af compliant active splitter ensures safe power delivery
  • Converts 48V PoE input to regulated 5V 2.4A Micro USB output
  • Separates power and data for stable device operation
  • Built-in overvoltage, overcurrent and short-circuit protection safeguards hardware
  • Compact design simplifies IoT and smart home installations

Specifications

No published specifications for this item yet.

Questions about this item

What PoE source do I need to power this splitter?

You need a standard IEEE 802.3af compliant PoE switch or PoE injector that supplies 48V over the Ethernet cable.

Will my Raspberry Pi 3B+ still pass network data through this adapter?

Yes, the splitter separates power and network signal, so the Ethernet data passes through normally while delivering 5V 2.4A to the Pi's Micro USB port.

How can I confirm the splitter is delivering stable power after I connect it?

The connected device should power on reliably without voltage drops; built-in overvoltage, overcurrent and short-circuit protection will cut output if limits are exceeded.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.