We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black adapter with IEC C14 male plug and C7 female socket

SMUGDESK

SMUGDESK IEC320 C14 to C7 Power Adapter 10A 250V

SKU CH-0WF3-11DE3

Converts a standard IEC C14 inlet to a C7 socket so devices with a two-pin port can draw power from PDUs, UPS units or rack outlets.

  • Converts IEC C14 inlet to C7 socket for direct device power
  • 10 A 250 V rating with oxygen-free copper core for low-loss delivery
  • Fits TVs, laptop bricks, monitors, PDU, UPS and rack-mount gear
  • Reinforced PVC jacket and strain relief resist bending wear and wire fracture
  • Compact plug-and-play adapter needs no driver for instant setup

Universal C14-to-C7 adapter

This IEC 320 C14 male to C7 female adapter converts a standard IEC input into a two-pin C7 port so compatible devices can draw power directly from PDU, UPS or rack-mount outlets. It serves home, office and lab environments where equipment uses a C7 socket but only IEC C14 sources are available. No driver or configuration is required.

Reinforced PVC housing and strain relief

A tough flexible PVC shell resists abrasion, bending, high temperature and ageing while the strain-relief reinforcement at each connector joint protects internal copper wires from pulling stress. Thick oxygen-free copper conductors rated at 10 A and 250 V AC deliver stable power with low heat generation during continuous operation. The compact plug-and-play form factor fits tight rack spaces without blocking adjacent ports.

Ready-to-use converter with no extras

The package contains only the adapter itself, so there are no additional cables, software or mounting hardware to manage. Immediate compatibility with televisions, laptop power bricks, monitors, small audio gear and network peripherals means you simply connect the C14 end to your power source and the C7 end to the device. This eliminates the hassle of mismatched interfaces without adding clutter.

Highlights

  • Converts IEC C14 inlet to C7 socket for direct device power
  • 10 A 250 V rating with oxygen-free copper core for low-loss delivery
  • Fits TVs, laptop bricks, monitors, PDU, UPS and rack-mount gear
  • Reinforced PVC jacket and strain relief resist bending wear and wire fracture
  • Compact plug-and-play adapter needs no driver for instant setup

Specifications

No published specifications for this item yet.

Questions about this item

What IEC standard does the C14-to-C7 adapter follow, and what current limit does it enforce?

The adapter follows the IEC 320 standard and is rated for a maximum of 10 A at 250 V AC.

What physical clearance does the reinforced strain-relief and PVC housing require around the C7 socket?

The compact plug-and-play body fits tight rack and desk spaces; the moulded strain-relief adds only a few millimetres beyond the C7 face.

How do you install the adapter, and which orientation mistake causes intermittent power?

Insert the C14 male end into the IEC outlet until it clicks, then plug the device’s C7 connector straight in — forcing the C7 at an angle bends the pins and breaks contact.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.