We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black right-angle power adapter with C14 male plug and upward-facing C13 female socket

SMUGDESK

SMUGDESK IEC 320 C14 to Upward 90° Right-Angle C13 Power Adapter 10A 250V

SKU CH-45N5-GA0NC

An IEC 320 C14-to-C13 adapter with an upward 90° right-angle design that eases cable routing in tight rack spaces, rated 10 A at 250 V

  • Optimises cable routing in tight spaces with upward 90° right-angle C13 port
  • Rated 10A 250V AC for reliable power to PDU, UPS and server equipment
  • Upward angle prevents sharp bends reducing connector stress and extending cord life
  • Flame-retardant housing with solid copper contacts ensures stable conductivity and anti-ageing performance
  • Compact plug-and-play design suits server cabinets and narrow rack-mount installations

Right-Angle C14-to-C13 Adapter

This IEC 320 adapter converts a C14 male inlet to an upward-facing 90-degree C13 female port. It is built for installers who route power cables inside tight server cabinets, rack-mount chassis or PDU strips where straight connectors would collide with walls or neighbouring equipment. The compact moulding lets the cord run parallel to the device body, keeping aisles clear and airflow paths open.

Fit and Cable Management

The upward angle removes the need for sharp bends that strain conductors and loosen contacts over time. By presenting the C13 socket in the same plane as the equipment panel, it frees vertical clearance behind the rack rail and prevents the plug from fouling cable-management arms or door latches. No tools are required; the adapter simply inserts between the existing C14 inlet and a standard C13 power cord.

Replacing Straight Connectors

The adapter replaces a straight C13-to-C14 jumper when rear-panel depth is limited or when a vertical PDU forces the cord to kink. The upgrade is worth it whenever the current cable bend radius is tighter than the connector body allows, or when repeated insertion cycles have weakened a fixed-angle plug. Do not exceed the 10 A, 250 V AC rating marked on the housing.

Highlights

  • Optimises cable routing in tight spaces with upward 90° right-angle C13 port
  • Rated 10A 250V AC for reliable power to PDU, UPS and server equipment
  • Upward angle prevents sharp bends reducing connector stress and extending cord life
  • Flame-retardant housing with solid copper contacts ensures stable conductivity and anti-ageing performance
  • Compact plug-and-play design suits server cabinets and narrow rack-mount installations

Specifications

No published specifications for this item yet.

Questions about this item

How much current can the adapter handle before it becomes the limiting factor under continuous load?

The adapter is rated for 10 A at 250 V AC, so sustained loads above 10 A will exceed its limit.

Does the housing or contacts get hot or noisy when the adapter runs all day at full rating?

The flame-retardant insulating shell and solid copper contacts are designed for stable long-term operation without extra cooling or noise.

What type of inlet must my equipment already have for this adapter to plug straight in?

Your device needs a standard IEC 320 C14 inlet to accept the adapter's C13 female port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.