We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with HDMI ports, optical and 3.5mm audio jacks

SMUGDESK

SMUGDESK HDMI 2.0 1 In 2 Out Audio Extractor Splitter 4K@60Hz

SKU CH-XFJJ-NWN74

Splits one HDMI 2.0 source to two 4K@60Hz displays while extracting audio via SPDIF optical and 3.5mm AUX for speakers or headphones

  • 4K 60 Hz video on two screens from one source
  • HDMI 2.0 and HDCP 2.2 keep protected content playing
  • SPDIF optical and 3.5 mm AUX pull audio out separately
  • Works with 1080p 720p and 3D sources too
  • No drivers required just connect and use

HDMI 2.0 1×2 Splitter with Audio Extraction

This HDMI 2.0 splitter takes a single source and duplicates it across two synchronous display outputs at up to 4K@60Hz. It also decodes the embedded audio stream and sends it to dedicated SPDIF optical and 3.5mm AUX ports. The unit is built for home theatre, gaming setups and multimedia installations where picture and sound must travel separate paths.

For systems that need two screens and separate audio

It suits anyone connecting a Blu-ray player, console, set-top box or laptop to two 4K displays while feeding a soundbar, amplifier or headphones through the extracted ports. Buyers who only need one display output, or who require additional audio interfaces beyond SPDIF and 3.5mm, should look at other products.

HDCP 2.2 compliance for protected 4K content

The splitter handles the HDCP 2.2 handshake required by commercial 4K@60Hz sources, so copy-protected material plays without interruption. Without this compliance, protected streams would fall back to lower resolutions or show no picture at all.

Highlights

  • 4K 60 Hz video on two screens from one source
  • HDMI 2.0 and HDCP 2.2 keep protected content playing
  • SPDIF optical and 3.5 mm AUX pull audio out separately
  • Works with 1080p 720p and 3D sources too
  • No drivers required just connect and use

Specifications

No published specifications for this item yet.

Questions about this item

What video resolution and refresh rate does the HDMI 2.0 interface support?

The HDMI 2.0 interface supports 4K at 60 Hz, 2160P, 1080P, 720P and 3D video formats with HDCP 2.2 compliance.

What audio output ports are available on the splitter?

The splitter provides a SPDIF optical Toslink port and a 3.5 mm AUX jack for separate audio extraction.

How is the unit powered and what is the setup process?

It is a plug-and-play device with no driver required; connect the HDMI source, displays and audio equipment, then power the unit to operate.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.