We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Slimline SFF8654 4i to SFF8654 4i cable, .5m length, matte connectors

SMUGDESK

SMUGDESK Gen5 MCIO Slimline SFF8654 4i to SFF8654 4i Cable 0.5M

SKU CH-SA59-GFCG2

Connects SFF8654 4i ports at 24Gbps for NVMe, SAS and SATA drives with a .5M lowloss cable built to PCIe 5.0

  • PCIe 5.0 compliant link for high-density server storage
  • Stable 24Gbps bandwidth for NVMe SSDs, SAS/SATA HDDs and RAID controllers
  • 5M compact length enables clean routing in tight chassis
  • Low-loss conductors minimise attenuation and crosstalk for enterprise reliability
  • Plug-and-play with mainstream servers, workstations and data centre storage hardware

Direct SFF8654 4i interconnect

This Gen5 Slimline cable links two SFF8654 4i ports for server storage. It handles NVMe SSDs, SAS and SATA drives and RAID controllers in compact chassis and data center backplanes. The short length keeps internal wiring tidy.

Lowloss conductors and shielding

Built with lowloss wire and antiinterference shielding, the cable maintains steady 24Gbps throughput under PCIe 5.0. Signal attenuation and crosstalk are minimized for enterprisegrade reliability. The .5 meter run fits tight routing without excess slack.

Replaces longer or older generation cables

Upgrade from lengthier or lower speed links that clutter tight bays or limit bandwidth. The jump is worth it when moving to Gen5 NVMe or RAID arrays that need full 24Gbps lanes. Builders needing a different connector type or longer reach should choose another cable.

Highlights

  • PCIe 5.0 compliant link for high-density server storage
  • Stable 24Gbps bandwidth for NVMe SSDs, SAS/SATA HDDs and RAID controllers
  • 5M compact length enables clean routing in tight chassis
  • Low-loss conductors minimise attenuation and crosstalk for enterprise reliability
  • Plug-and-play with mainstream servers, workstations and data centre storage hardware

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the SFF8654 4i ends to my RAID controller and backplane, and what alignment mistake should I avoid?

Align the keyed SFF8654 4i connector with the port notch, press straight in until the latch clicks, and do not force it at an angle which can bend the delicate pins inside the Gen5 interface.

What upkeep will this 0.5M Gen5 cable need over time in a server chassis?

No scheduled maintenance is required; periodically inspect the latch clips and shielding for dust buildup or physical stress from vibration, and reseat the connectors if intermittent link errors appear.

At 24Gbps sustained throughput, what limit appears first during heavy NVMe or SAS workloads?

The primary limit is the PCIe 5.0 lane budget of the attached controller or backplane; if the host cannot supply four full Gen5 lanes the cable will negotiate a lower speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.