We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dual mSATA SSD adapter in 2.5 inch SATA enclosure with open heat-dissipation design

SMUGDESK

SMUGDESK Dual mSATA to 2.5 Inch SATA Adapter Enclosure 2 Bay

SKU CH-5GW2-1QGWZ

Converts two mSATA SSDs into a single 2.5-inch SATA drive with RAID 0, SPAN and JBOD modes

  • Converts two mSATA SSDs into one standard 2.5-inch SATA drive
  • Supports RAID 0, SPAN and JBOD modes for flexible storage configuration
  • Fits any universal 2.5-inch SATA bay in desktops, servers or cages
  • Built-in bridge chip provides reliable data transmission and continuous operation
  • Tool-free design with hollow heat dissipation keeps dual SSDs cool under load

Dual mSATA to 2.5" SATA Adapter

The SMUGDESK enclosure converts two mSATA mini SATA solid state drives into a single standard 2.5-inch SATA form factor. It outputs through a standard 22Pin SATA interface for direct installation in desktop PCs, servers or industrial equipment. Builders needing to repurpose spare mSATA SSDs into a standard drive bay will find this a compact solution.

Thermal Design for Dual SSD Loads

An optimized hollow heat dissipation structure reduces operating temperatures for both mSATA drives during intensive file reading and writing. This passive cooling approach helps avoid performance throttling under sustained high-load working states. The design supports long-term continuous operation without active fans or additional power connections.

RAID 0 SPAN JBOD Mode Selection

An onboard bridge control chip enables three operating modes selectable for capacity or speed planning. RAID 0 stripes data across both drives for doubled sequential throughput. SPAN combines them into one large logical volume. JBOD presents each mSATA SSD independently to the system. Users configure the mode to match their storage strategy without extra software.

Highlights

  • Converts two mSATA SSDs into one standard 2.5-inch SATA drive
  • Supports RAID 0, SPAN and JBOD modes for flexible storage configuration
  • Fits any universal 2.5-inch SATA bay in desktops, servers or cages
  • Built-in bridge chip provides reliable data transmission and continuous operation
  • Tool-free design with hollow heat dissipation keeps dual SSDs cool under load

Specifications

No published specifications for this item yet.

Questions about this item

How do I install two mSATA SSDs into the 2.5-inch SATA bay and what step is often missed?

Insert both mSATA drives onto the PCB, secure them with the provided screws, then slide the 22-pin SATA assembly into the 2.5-inch bay; the step often missed is setting the RAID 0, SPAN or JBOD mode via the onboard switch before closing the case.

What maintenance or replacement will this adapter need over time?

The bridge control chip and SATA interface are solid-state with no moving parts, so the enclosure itself requires no scheduled maintenance; only the installed mSATA SSDs may eventually need replacement after their write endurance is reached.

What limit appears first under sustained heavy read and write loads?

The hollow heat-dissipation structure keeps dual mSATA SSD temperatures in check, so the first limit under sustained use is the SATA 3 interface bandwidth rather than thermal throttling of the drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.