We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SMUGDESK

SMUGDESK DisplayPort 2.0 Cable 10FT 80Gbps 16K@60Hz 4K@240Hz

SKU CH-P4SA-XR9QJ

A 10 ft DisplayPort 2.0 cable rated for 80 Gbps bandwidth with support up to 16K at 60 Hz and 4K at 240 Hz

  • 80 Gbps bandwidth for loss-free 16K 60 Hz video
  • 4K at 240 Hz refresh eliminates motion blur in games
  • 10 ft length fits large desk or living-room setups
  • Backward compatible with DP 1.4 and 1.2 hardware
  • Braided nylon jacket resists wear during frequent reconnects

10 ft DisplayPort 2.0 cable for high-resolution

This 10 ft DisplayPort 2.0 cable delivers 80 Gbps bandwidth and supports 16K at 60 Hz, 8K at 120 Hz and 4K at 240 Hz. It is built for gamers and professionals who need high refresh rates and HDR on a single display. The cable is backward compatible with DisplayPort 1.4 and 1.2 devices. It also supports FreeSync and G-Sync variable refresh technologies.

Bandwidth ceiling and DSC requirement at top

The 80 Gbps link enables 16K at 60 Hz only with DSC 1.2a compression active. Uncompressed 16K exceeds the cable's raw bandwidth, so the source and sink must both implement DSC. At 4K the cable can handle 240 Hz, but lower resolutions such as 2K reach 360 Hz only when the graphics card and monitor timings allow. HDR 4:4:4 and HDCP 2.2 are supported within the same bandwidth envelope.

Check source and sink capabilities before ordering

Verify that your graphics card and monitor both have DisplayPort 2.0 ports rated for UHBR10 or higher. Confirm the GPU driver and monitor firmware support the target resolution and refresh rate with DSC enabled. The cable's 20-pin power line is disabled, so it cannot supply power to active adapters. Ensure your devices do not rely on pin-20 power for signal negotiation.

Highlights

  • 80 Gbps bandwidth for loss-free 16K 60 Hz video
  • 4K at 240 Hz refresh eliminates motion blur in games
  • 10 ft length fits large desk or living-room setups
  • Backward compatible with DP 1.4 and 1.2 hardware
  • Braided nylon jacket resists wear during frequent reconnects

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Which length should I choose for my desk setup?

The cable is supplied in a 10 ft length, giving roughly three metres of reach between a graphics card and a monitor on a typical desk.

What does the 80 Gbps bandwidth actually deliver on my screen?

It enables 16K at 60 Hz, 8K at 120 Hz or 4K at 240 Hz with HDR and DSC 1.2a, provided the GPU and monitor support those modes.

Is the DisplayPort 2.0 connector fully pinned?

The 20-pin power line is disabled, so the cable carries only video and auxiliary data; it still meets the VESA UHBR10 spec and works with DP 1.4 and 1.2 ports.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.