SMUGDESK
SMUGDESK DisplayPort 2.0 cable 1 m 80 Gbps
A 1 m DisplayPort 2.0 cable delivering 80 Gbps bandwidth for 16K at 60 Hz, 8K at 120 Hz and 4K up to 240 Hz with HDR and DSC support
- Drives 16K at 60 Hz with 80 Gbps bandwidth
- Delivers 4K at 165 Hz for ultra-smooth gaming
- Backward compatible with DP 1.4 and DP 1.2
- Braided jacket with gold-plated connectors resists wear
- Supports dynamic HDR and DSC 1.2a for vivid colour
What this cable is for
This DisplayPort 2.0 cable carries up to 80 Gbps between a graphics card or laptop and a high-refresh monitor. It supports 16K at 60 Hz with DSC, 10K at 60 Hz uncompressed, 8K at 120 Hz, and 4K at up to 240 Hz. The one-metre braided length suits desktop setups where the display sits close to the source.
Thermals noise and power
As a passive copper cable it generates no heat and adds no audible noise to the system. Power draw is limited to the small amount required for the DisplayPort auxiliary channel, so it does not affect the GPU power budget or require an external supply.
Upgrade path and limits
The cable replaces any older DisplayPort 1.4 or 1.2 link that cannot sustain 4K above 144 Hz or 8K at 60 Hz without compression. It is not for runs longer than one metre, for users who need 16K at 120 Hz, or for builders who require a locking connector rated for frequent hot-plug cycles.
Highlights
- Drives 16K at 60 Hz with 80 Gbps bandwidth
- Delivers 4K at 165 Hz for ultra-smooth gaming
- Backward compatible with DP 1.4 and DP 1.2
- Braided jacket with gold-plated connectors resists wear
- Supports dynamic HDR and DSC 1.2a for vivid colour
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
SMUGDESK DisplayPort 2.0 cable 3.3ft 80Gbps 16K 60Hz 4K 165Hz braided
SMUGDESK 8K Mini DisplayPort to DisplayPort 1.4 Cable 4K@120Hz 32.4Gbps 3.3FT
SMUGDESK Mini DisplayPort to DisplayPort 1.4 cable 10ft 32.4Gbps 8K@60Hz 4K@144Hz 2K@240Hz HDR
Questions about this item
How do I plug in the 1 m DisplayPort 2.0 cable so the 80 Gbps link trains at 16K 60 Hz?
Connect the gold-plated DisplayPort plugs firmly into the source and display until the latches click; verify the monitor reports 15360 x 8640 at 60 Hz in its OSD to confirm full 80 Gbps operation.
Will the braided jacket or gold-plated contacts need any cleaning or replacement over time?
The braided jacket and gold-plated connectors are passive; no scheduled cleaning or replacement is required — just reseat the plugs if the link drops to a lower rate.
At what point does sustained 4K gaming hit a refresh-rate ceiling on this cable?
The cable supports 4K 3840 x 2160 up to 240 Hz uncompressed; sustained use beyond 240 Hz would exceed the 80 Gbps bandwidth limit.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket








