SMUGDESK
SMUGDESK DisplayPort 1.4 fiber optic cable 66 ft
A 66 ft fiber-optic DisplayPort 1.4 cable delivering 32.4 Gbps for 8K at 60 Hz or 4K at 144 Hz
- 8K 60 Hz clarity from 32.4 Gbps bandwidth
- 4K 240 Hz motion with zero compression loss
- 66 ft reach via hybrid glass-fiber construction
- Gold-plated zinc-alloy connectors resist corrosion and cracking
- Works with PC, laptop, Nvidia GPU, projector and HDTV
Signal reach and bandwidth
This DisplayPort 1.4 fiber optic cable spans 66 feet while delivering up to 32.4 Gbps. It suits installers and enthusiasts who need long runs between a PC or laptop and a display, projector or HDTV without signal loss.
Copper length limit and active converters
The fiber design replaces passive copper cables that typically fail beyond 10 metres at high resolutions. The jump is worth it when the route exceeds that distance or must pass through walls where thicker copper cannot bend.
DisplayPort 1.4 link constraints
Bandwidth caps at 32.4 Gbps, so 8K reaches 60 Hz while 4K can hit 240 Hz with compression. HDR10, Dolby Vision and HDCP 2.2 are supported, but the link cannot carry 8K at 120 Hz or exceed the 1.4 specification.
Highlights
- 8K 60 Hz clarity from 32.4 Gbps bandwidth
- 4K 240 Hz motion with zero compression loss
- 66 ft reach via hybrid glass-fiber construction
- Gold-plated zinc-alloy connectors resist corrosion and cracking
- Works with PC, laptop, Nvidia GPU, projector and HDTV
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
SMUGDESK DisplayPort 1.4 Fiber Optic Cable 100Feet 8K@60Hz 4K@144Hz 32.4Gbps
SMUGDESK 100FT Fiber 8K DisplayPort Cable DP 1.4 HBR3 32.4Gbps 8K@60Hz 4K@144Hz
Questions about this item
What length and connector style does this 66 ft DisplayPort cable use for in-wall routing?
The cable is 66 ft long with a hybrid glass-fibre and copper construction, 24K gold-plated connectors and a zinc-alloy shell designed for in-wall installation.
Which end of the directional AOC cable plugs into the graphics card and which into the monitor?
Connect the end marked Source to the graphics card or laptop and the end marked Display to the monitor or projector; reversing them will break the signal.
How should the TPE jacket and gold-plated connectors be maintained over time?
Avoid sharp bends, pull only by the connector body, and occasionally wipe the gold pins with a dry lint-free cloth to prevent oxidation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket








