We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided DisplayPort extension cable with gold connectors, two metres long

SMUGDESK

SMUGDESK DisplayPort 1.4 extension cable 2 m 32.4 Gbps braided

SKU CH-63H4-C4GPJ

A 2 m DisplayPort 1.4 extension cable rated for 32.4 Gbps bandwidth, supporting 8K at 60 Hz and 4K at 144 Hz

  • Supports 8K 60 Hz video with 32.4 Gbps bandwidth
  • Carries 4K 240 Hz and 2K 144 Hz for high-refresh gaming
  • Braided jacket tested to 10 000 plug cycles for lasting durability
  • Gold-plated connectors and triple shielding resist interference and corrosion
  • Adds 2 m reach with 5 cable ties for tidy cable routing

Extension cable for DisplayPort 1.4

This 2 m DisplayPort 1.4 extension cable adds 6.6 ft of reach to an existing DisplayPort link. It is built for users who need to route a connection around furniture or through cable management without replacing the primary cable. The male-to-female design plugs into a standard DisplayPort output and accepts any DisplayPort 1.4 or earlier cable. It suits home-office desks, multi-monitor arms and gaming rigs where the graphics-card port is hard to reach.

Passive copper link with triple shielding

The cable uses 26-30 AWG solid copper conductors wrapped in triple-layer shielding to reject electromagnetic interference. Gold-plated connectors rated for 10000 mating cycles resist oxidation and maintain low contact resistance. A nylon braided jacket protects the bundle from abrasion and kinking during repeated routing. As a passive copper assembly it draws no external power and adds no active components that could generate heat or noise.

Five Velcro ties included for cable management

The package supplies five reusable cable ties that let installers bundle the extension with neighbouring wires. Securing the slack reduces strain on the DisplayPort ports and keeps airflow paths clear inside a case or behind a monitor stand. No driver, firmware or configuration utility is required; the link negotiates HBR3 rates automatically. The ties add no electronic function but simplify a tidy installation.

Highlights

  • Supports 8K 60 Hz video with 32.4 Gbps bandwidth
  • Carries 4K 240 Hz and 2K 144 Hz for high-refresh gaming
  • Braided jacket tested to 10 000 plug cycles for lasting durability
  • Gold-plated connectors and triple shielding resist interference and corrosion
  • Adds 2 m reach with 5 cable ties for tidy cable routing

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the SMUGDESK DisplayPort 1.4 extension cable and what step do people often miss?

Connect the male end to your source and the female end to your existing cable; the step often missed is ensuring both connectors are fully seated until the latches click to guarantee the 32.4 Gbps link.

What maintenance or replacement will the SMUGDESK DisplayPort 1.4 extension cable need later?

The 24K gold-plated connectors and braided jacket are rated for over 10000 insertion cycles, so no routine maintenance is required; replace only if physical damage occurs.

What limit appears first on the SMUGDESK DisplayPort 1.4 extension cable during sustained high-resolution use?

The 32.4 Gbps bandwidth ceiling is the first limit, capping sustained transmission at 8K 60 Hz or 4K 144 Hz with DSC 1.2 compression active.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.