SMUGDESK
SMUGDESK DisplayPort 1.4 Cable 1M Silver 8K 60Hz 4K 144Hz
VESA-certified DisplayPort 1.4 cable delivers 32.4 Gbps bandwidth for 8K at 60 Hz, 4K at 144 Hz and 1080p at 240 Hz with HDR10 and 32 audio channels
- ColorSilver
- VESA certified DisplayPort 1.4 cable delivers 32.4 Gbps bandwidth for 8K 60Hz and 4K 144Hz gaming
- HBR3 with DSC 1.2 compression enables visually lossless 8K 60Hz 10-bit HDR on a single link
- FEC forward error correction and 28 AWG tinned copper conductors maintain signal integrity over 1 metre length
- Backward compatible with DisplayPort 1.3, 1.2 and 1.1 so one cable works across monitor generations
- Supports 32 audio channels plus BT.601, BT.709, BT.2020 and Adobe RGB colour formats for home-theatre accuracy
What it is
This VESA-certified DisplayPort 1.4 cable carries 32.4 Gbps HBR3 bandwidth with DSC 1.2 compression and forward error correction. It supports 8K at 60 Hz, 4K at 144 Hz and 1080p at 240 Hz plus HDR10 and 32 audio channels. The one-metre silver cable uses 28 AWG tinned copper conductors and is backward compatible with DisplayPort 1.3, 1.2 and 1.1.
Deciding specification
The single figure that determines fit is the 32.4 Gbps HBR3 link rate; it must match the source and display ports to unlock 8K 60 Hz or 4K 144 Hz without falling back to a lower mode. Multi-Stream Transport allows daisy-chaining monitors from one output. HDCP 2.2 and 1.4 are both supported for protected content.
Thermals noise power
As a passive copper cable it generates no heat, emits no noise and draws no external power. Signal integrity is maintained by the tinned conductors and FEC error correction across the full one-metre length. Power consumption is limited to the negligible current supplied by the DisplayPort source.
Highlights
- VESA certified DisplayPort 1.4 cable delivers 32.4 Gbps bandwidth for 8K 60Hz and 4K 144Hz gaming
- HBR3 with DSC 1.2 compression enables visually lossless 8K 60Hz 10-bit HDR on a single link
- FEC forward error correction and 28 AWG tinned copper conductors maintain signal integrity over 1 metre length
- Backward compatible with DisplayPort 1.3, 1.2 and 1.1 so one cable works across monitor generations
- Supports 32 audio channels plus BT.601, BT.709, BT.2020 and Adobe RGB colour formats for home-theatre accuracy
Specifications
| Color | Silver |
|---|
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
SMUGDESK DisplayPort 1.4 cable 2 m 8K 60 Hz 4K 144 Hz 32.4 Gbps black
- Black
SMUGDESK DisplayPort 1.4 cable 6.6ft 8K@60Hz 4K@144Hz 2K@240Hz HBR3 32.4Gbps
Questions about this item
What does the 32.4 Gbps bandwidth mean when I plug this cable into my PC?
It allows 8K resolution at 60Hz with 10-bit colour HDR, or 4K at 144Hz, using DSC 1.2 visually lossless compression and forward error correction.
How does the DisplayPort 1.4 interface limit what I can actually run?
The HBR3 standard caps the link at 32.4 Gbps, enabling the listed 8K 60Hz, 4K 144Hz and 1080p 240Hz modes while staying backward compatible with 1.3, 1.2 and 1.1 devices.
What do I need on my desk for the 1 metre silver cable to reach and connect?
A 1 metre length reaches monitors up to 3.3 feet away; the standard DisplayPort plugs fit any DP, DP++ or DisplayPort++ port on graphics cards such as RTX 3070, 3080, 3090 or Radeon RX 6800, 6900 and common monitors.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.








