We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort cable with labelled Source and Display connectors, ten metre length

SMUGDESK

SMUGDESK DisplayPort 1.4 cable 10m 33ft 8K 60Hz 4K 144Hz HBR3 32.4Gbps

SKU CH-PK86-KM5HJ

A 10 metre fibre-optic DisplayPort 1.4 cable delivering 8K at 60 Hz or 4K at 144 Hz with HBR3 32.4 Gbps bandwidth, HDCP 2.2 and DSC 1.2 support

Cable Length 33 Feet

  • 8K resolution at 60 Hz for ultra-sharp visuals
  • 4K at 144 Hz refresh rate for smooth gaming motion
  • HBR3 bandwidth of 32.4 Gbps carries high-bitrate signals
  • 10 m / 33 ft optical fibre reaches distant displays
  • Directional connectors ensure correct source-to-display link

10 m DisplayPort 1.4 cable

The SMUGDESK cable is a new DisplayPort 1.4 link rated for HBR3 bandwidth of 32.4 Gbps. It carries 8K at 60 Hz or 4K at 144 Hz over a 10 metre, 33 foot optical fibre run. The connection is directional, with marked Source and Display ends, and supports HDCP 2.2, DSC 1.2 and HDR.

Who this suits and who should look elsewhere

The cable suits users who need an 8K or high-refresh 4K signal across a room or through conduit where copper cables would lose integrity. It is not for builders who need a short passive copper link, buyers who want a bi-directional plug, or installations that cannot accommodate a fixed source-to-display orientation.

Bandwidth and resolution ceiling

The single specification that decides fit is the HBR3 32.4 Gbps rating enabling 8K at 60 Hz and 4K at 144 Hz with DSC 1.2 compression. If the target display and source both support this bandwidth tier the cable will deliver the full signal; if either device is limited to a lower tier the extra headroom goes unused.

Highlights

  • 8K resolution at 60 Hz for ultra-sharp visuals
  • 4K at 144 Hz refresh rate for smooth gaming motion
  • HBR3 bandwidth of 32.4 Gbps carries high-bitrate signals
  • 10 m / 33 ft optical fibre reaches distant displays
  • Directional connectors ensure correct source-to-display link

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does the SMUGDESK DisplayPort 1.4 cable draw during all-day 8K 60Hz use?

The cable uses optical fiber for long-distance transmission and requires no external power adapter; it draws only the small amount supplied by the DisplayPort source port.

Which devices must I already own to use the 10m 33ft cable at 4K 144Hz?

You need a DisplayPort 1.4 source with HBR3 32.4Gbps output and DSC 1.2 support, plus a DisplayPort 1.4 monitor that accepts 4K 144Hz or 8K 60Hz input.

Will the directional Source and Display ends work with my older DisplayPort 1.2 monitor?

Yes, the cable is backward compatible; the Source plug goes into the GPU and the Display plug into the monitor, but the link will run at DisplayPort 1.2 speeds rather than 8K 60Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.