SMUGDESK
SMUGDESK DisplayPort 1.4 cable 10m 33ft
An optical-fibre DisplayPort 1.4 cable carrying 8K at 60 Hz or 4K at 144 Hz over 10 m with directional Source and Display connectors
- 8K 60 Hz resolution delivered over 10 m
- 4K 144 Hz refresh rate for smooth gaming
- 4 Gbps HBR3 bandwidth carries full signal
- Optical fibre design prevents loss at long distance
- Directional Source/Display plugs ensure correct connection
10-metre DisplayPort 1.4 cable
This 10-metre SMUGDESK cable carries DisplayPort 1.4 signals over optical fibre. It supports 8K at 60 Hz and 4K at 144 Hz with a 32.4 Gbps bandwidth. The 7680 × 4320 resolution is maintained across the full length without signal loss.
Directional fibre link for long runs
The cable has a fixed "Source" end for the computer and a "Display" end for the monitor; reversing them prevents any image. It suits home-theatre, office, gaming and VR setups that need a 10-metre reach. Builders needing a passive copper cable or a shorter length should choose a different product.
Optical fibre construction decides compatibility
Because the link uses active optical fibre, it only works when the Source plug connects to the GPU or laptop and the Display plug connects to the screen. If your installation requires a bi-directional or copper cable, this model will not function.
Highlights
- 8K 60 Hz resolution delivered over 10 m
- 4K 144 Hz refresh rate for smooth gaming
- 4 Gbps HBR3 bandwidth carries full signal
- Optical fibre design prevents loss at long distance
- Directional Source/Display plugs ensure correct connection
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
SMUGDESK DisplayPort 1.4 cable 10m 33ft 8K 60Hz 4K 144Hz HBR3 32.4Gbps
Questions about this item
Does the 10 m cable come with any adapters or do I need to buy them separately?
The cable has DisplayPort connectors on both ends and is ready to use; no adapters are included or required for a standard DP-to-DP connection.
Should I choose this 10 m version or the 30 m 100 ft version for my setup?
Pick the 10 m 33 ft length if your source and display are within that distance; the 30 m 100 ft version is only needed for longer runs.
Will the 32.4 Gbps bandwidth actually deliver 8K 60 Hz on my gaming monitor?
Yes, the HBR3-rated fiber cable supports 7680×4320 at 60 Hz and 4K at 144 Hz provided your graphics card and monitor both support those modes.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.








