We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black right-angled ATX 24Pin power adapter with locking buckle

SMUGDESK

SMUGDESK ATX 24Pin to 24Pin 90 Degree Mainboard Angled Connector PC Non-Modular Supply Wiring

SKU CH-DDX7-02M3X

A 90-degree ATX 24Pin adapter that eases cable routing in tight cases and improves airflow

  • 90-degree angle saves chassis space and eases cable routing
  • Standard 24-pin ATX male-to-female fits mainstream desktop motherboards
  • Right-angle design avoids sharp bends for better airflow
  • Firm locking buckle prevents loose power contact during use
  • Works with both modular and non-modular ATX power supplies

Right-Angle ATX 24-Pin Adapter

This 90-degree ATX 24-pin to 24-pin adapter redirects the main motherboard power cable at a right angle. It is designed for PC builders working in compact chassis where a straight connector would press against the side panel or block airflow. The standard pin layout matches mainstream desktop motherboards and works with both modular and non-modular ATX power supplies.

Solves Tight Clearance and Cable Strain

The adapter replaces a direct 24-pin connection that would otherwise force a sharp bend in the PSU cable. The jump is worth it when the motherboard socket sits close to the case wall, a large CPU cooler, or a drive cage, making straight routing impossible. It also reduces mechanical stress on the motherboard power header during transport or component swaps.

Simple Plug-In With Secure Lock

Installation requires no tools: align the male end with the PSU cable and the female end with the motherboard socket, then press until the locking buckle clicks. The firm latch prevents accidental disconnection from vibration. The only common issue is forgetting to verify that the motherboard uses a standard 24-pin ATX interface, which the supplier notes as a pre-purchase check.

Highlights

  • 90-degree angle saves chassis space and eases cable routing
  • Standard 24-pin ATX male-to-female fits mainstream desktop motherboards
  • Right-angle design avoids sharp bends for better airflow
  • Firm locking buckle prevents loose power contact during use
  • Works with both modular and non-modular ATX power supplies

Specifications

No published specifications for this item yet.

Questions about this item

How much clearance does the 90-degree 24Pin connector need behind the motherboard tray?

The right-angle design projects the cable sideways from the 24Pin socket, so you only need the depth of the adapter body itself; measure the gap between your motherboard and side panel to confirm fit.

Which way should the 90-degree bend face when I plug the adapter into the 24Pin motherboard header?

Orient the adapter so the cable exits toward the nearest routing channel; the locking buckle clicks only when the 24Pin male pins are fully seated in the motherboard socket.

Will the locking buckle on the 24Pin adapter wear out after repeated upgrades?

The buckle is moulded into the sturdy plastic housing and rated for normal build cycles; if it ever loses tension, simply replace the low-cost adapter during your next rebuild.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.