We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 90-degree SATA 3.0 cable with four right-angle connectors on each end

SMUGDESK

SMUGDESK 90Degree SATA 3.0 Mini SAS 4SATA to 4SATA Cable

SKU CH-E2FB-6THTT

Right-angle SATA 3.0 cable connects four drives to a RAID controller or backplane at up to 6 Gbps, with 90-degree connectors that save space in tight server chassis

  • Right-angle 90° design saves space and reduces cable strain in tight server cases
  • SATA 3.0 7-pin 4-to-4 layout delivers up to 6Gbps bandwidth for SSD and HDD arrays
  • Tinned copper conductors lower signal loss for stable RAID and continuous server operation
  • Multi-layer shielding cuts electromagnetic interference to prevent data errors under heavy loads
  • Locking connectors hold firmly against vibration for secure plug-and-play storage setups

Cable design

The SMUGDESK 90Degree SATA 3.0 Mini SAS cable connects four 7-pin SATA drives to a Mini SAS controller or backplane using a single 4SATA-to-4SATA assembly. Its right-angle connectors relieve bending stress inside compact server cases and crowded PC chassis. This layout suits administrators who need dense storage cabling without sharp wire bends.

Target scenarios

Builders populating multi-drive RAID arrays or server storage backplanes benefit from the secure locking fit and tinned copper conductors that resist signal loss during continuous operation. Installations that require straight-through SATA plugs or a different Mini SAS pinout will not match this cable. The fixed 90-degree orientation also prevents use where a vertical connector clearance is mandatory.

Deciding specification

The cable carries SATA 3.0 signals at up to 6Gbps across each of the four 7-pin lanes. Verify that the host controller and target drives both operate at this interface generation to achieve the stated bandwidth.

Highlights

  • Right-angle 90° design saves space and reduces cable strain in tight server cases
  • SATA 3.0 7-pin 4-to-4 layout delivers up to 6Gbps bandwidth for SSD and HDD arrays
  • Tinned copper conductors lower signal loss for stable RAID and continuous server operation
  • Multi-layer shielding cuts electromagnetic interference to prevent data errors under heavy loads
  • Locking connectors hold firmly against vibration for secure plug-and-play storage setups

Specifications

No published specifications for this item yet.

Questions about this item

What bandwidth limit will I hit first when running this cable at full speed all day?

The SATA 3.0 interface caps sustained throughput at 6 Gbps, so that ceiling appears before any cable‑related bottleneck.

How much heat or noise does the cable add during 24‑hour RAID workloads?

Passive copper construction generates no noise and negligible heat; the tinned conductors and shielding simply maintain signal integrity under continuous load.

Which controller ports must my system already provide for this 4SATA to 4SATA cable to work?

You need a Mini SAS or RAID controller with four standard 7‑pin SATA 3.0 receptacles to plug each drive connector into.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.