We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SMUGDESK 25-pin DB25 parallel port adapter with low-profile metal bracket and internal cable

SMUGDESK

SMUGDESK 611900001 25Pin DB25 LPT Parallel Port Adapter Cable LowProfile Bracket

SKU CH-A78Z-00Q2A

Adds a 25-pin DB25 LPT port to HP SFF desktops via internal header, compliant with IEEE 1284 for legacy printers and industrial devices

  • Adds external LPT port via motherboard header
  • IEEE 1284 compliant for SPP ECP EPP modes
  • Low-profile bracket fits HP SFF chassis slots
  • Connects legacy printers POS terminals industrial gear
  • OEM part 611900001 with solid cable assembly

25-pin DB25 LPT parallel adapter for HP SFF

This OEM-style assembly adds an external IEEE 1284 parallel port to compatible HP small-form-factor desktops. It connects to the motherboard internal header and mounts through a low-profile bracket slot. The cable supports SPP, ECP and EPP communication modes for legacy printers, POS terminals and industrial peripherals. No driver installation is required on supported systems.

Low-profile bracket and internal header cable

The metal bracket fits slim chassis expansion slots while the fixed signal cable reaches the onboard parallel header. This design restores a missing DB25 port without consuming a PCIe slot or requiring external power. The assembly targets HP Elite SFF 6000, 6200, 8000 and 8200 series machines that retain the internal header but lack the external connector.

IEEE 1284 header-dependent interface

Functionality is limited to motherboards that provide a dedicated parallel-port pin header; systems without this header cannot use the adapter. The cable does not add a parallel port through PCIe, USB or any other bus. Maximum throughput follows the IEEE 1284 specification for SPP, ECP and EPP modes, which is far below modern USB or network speeds.

Highlights

  • Adds external LPT port via motherboard header
  • IEEE 1284 compliant for SPP ECP EPP modes
  • Low-profile bracket fits HP SFF chassis slots
  • Connects legacy printers POS terminals industrial gear
  • OEM part 611900001 with solid cable assembly

Specifications

No published specifications for this item yet.

Questions about this item

Will the DB25 connector or bracket need replacement after repeated plugging and unplugging?

The 25-pin DB25 female connector and low-profile metal bracket are built as a solid cable assembly for stable signal transmission; no wear items or scheduled replacements are identified.

What limits sustained throughput when a legacy printer or POS terminal runs continuously?

The IEEE 1284 interface caps the maximum transfer rate, and the internal header-to-DB25 cable length fixes the practical distance between the motherboard and the peripheral.

Does the adapter generate extra heat or fan noise inside an HP SFF chassis during all-day operation?

The passive cable assembly draws no additional power and adds no active components, so it does not increase heat output or acoustic load in the 6000, 6200, 8000 or 8200 series small-form-factor desktops.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.