We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black ARGB hub with ten 3-pin ports and SATA power connector

SMUGDESK

SMUGDESK 5V 3PIN ARGB Hub 1 to 10 Way Power Splitter Cord with SATA

SKU CH-VKBP-D43DX

Expands a single 5V 3PIN ARGB header to ten channels with SATA power for stable lighting

  • Expands one 5V 3PIN ARGB header to 10 channels
  • SATA power input prevents motherboard overload and voltage drop
  • Compatible with standard 5V ARGB sync software
  • Mounting holes enable tidy internal cable routing
  • Supports addressable RGB fans and LED strips

ARGB Hub Expands One Header to Ten Devices

This SMUGDESK hub converts a single motherboard 5V 3PIN ARGB header into ten addressable RGB channels. It supports simultaneous connection of multiple ARGB fans and LED strips for synchronized lighting. A separate SATA power input prevents motherboard header overload and ensures stable voltage delivery. Compact mounting holes simplify internal cable routing inside the chassis.

Suited for Multi-Fan Builds Not Single Strip Users

PC builders assembling multi-fan configurations or extensive LED strip layouts gain enough ports for complex lighting schemes. The SATA power feed keeps voltage steady across all ten channels during heavy loads. Users with only one or two ARGB devices do not need this expansion capability. Systems lacking a 5V 3PIN ARGB header cannot use this hub.

Ten Port Expansion Decides Fit

The defining specification is the 10-way signal expansion from one 5V 3PIN ARGB header. This port count determines whether your planned fan and strip quantity matches the hub capacity. Builders needing fewer connections will leave ports unused while those needing more require additional hubs. Verify your device count against this limit before purchase.

Highlights

  • Expands one 5V 3PIN ARGB header to 10 channels
  • SATA power input prevents motherboard overload and voltage drop
  • Compatible with standard 5V ARGB sync software
  • Mounting holes enable tidy internal cable routing
  • Supports addressable RGB fans and LED strips

Specifications

No published specifications for this item yet.

Questions about this item

What mounting features does the ARGB hub include for installation inside a PC case?

The hub has fixed mounting holes so it can be screwed or tied down to the chassis for tidy cable routing.

How is the hub connected to power and the motherboard, and what step is often missed?

Plug the 5V 3PIN ARGB cable into the motherboard header and connect a SATA power lead from the PSU; forgetting the SATA connection leaves the hub unpowered.

When would the SATA power cable need to be replaced?

Replace the SATA lead if the connector becomes loose, the insulation is damaged, or the PSU no longer supplies stable voltage to the hub.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.