We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
0.5m Slimline SAS 4.0 SFF8654 38pin to four leftangle SATA 7pin breakout cable

SMUGDESK

SMUGDESK .5M PCIe SAS 4.0 SFF8654 38Pin to 4×SATA 7Pin LeftAngle Cable

SKU CH-EV12-88MFS

Connects a Slimline SAS 4.0 port to four left-angle SATA drives using 30AWG copper wire for short internal routing

  • Converts SFF8654 38pin to four leftangle SATA 7pin for multidrive server expansion
  • 30AWG pure copper wire supports PCIe 4.0level stable highspeed data transmission
  • Leftangle SATA connector design optimizes spacesaving wiring in compact server chassis and dense backplanes
  • Fully compatible with RAID controllers 2.5/3.5 HDDs and SSDs for enterprise storage and NAS systems
  • 5M short length enables neat shortdistance internal routing with strong antiinterference shielding

Server storage breakout cable

This 0.5M internal cable converts a single SFF8654 38Pin Slimline SAS 4.0 port into four left-angle SATA 7Pin connectors. It is built with 30AWG pure copper wire to maintain PCIe 4.0-level signal integrity across the short run. The assembly targets administrators expanding drive counts inside rackmount servers or dense NAS enclosures.

Builders adding multiple drives to one controller

The left-angle SATA ends simplify routing in tight backplanes where straight connectors would block adjacent slots. It suits 2.5in and 3.5in HDDs or SSDs attached to a RAID controller or HBA with an SFF8654 uplink. Installers needing right-angle SATA plugs, longer reach beyond 0.5M, or a different uplink standard should select another cable.

SFF8654 38Pin uplink interface

The cable only works when the host side presents an SFF8654 38Pin Slimline SAS 4.0 receptacle. A mismatched controller port will prevent connection regardless of drive compatibility. Verify the controller or backplane documents list this exact connector before ordering.

Highlights

  • Converts SFF8654 38pin to four leftangle SATA 7pin for multidrive server expansion
  • 30AWG pure copper wire supports PCIe 4.0level stable highspeed data transmission
  • Leftangle SATA connector design optimizes spacesaving wiring in compact server chassis and dense backplanes
  • Fully compatible with RAID controllers 2.5/3.5 HDDs and SSDs for enterprise storage and NAS systems
  • 5M short length enables neat shortdistance internal routing with strong antiinterference shielding

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the cable is functioning correctly after connecting it to a RAID controller?

After installation the RAID controller BIOS should detect every attached 2.5 or 3.5 drive and report link speeds consistent with SAS 4.0 operation.

What does the package contain and what additional items are required?

The box includes the 0.5M SFF8654 38Pin to 4×SATA 7Pin left-angle cable only; compatible RAID controller, drives and mounting hardware must be sourced separately.

Which cable version should I choose for a compact server chassis with limited routing space?

The 19.68in left-angle SATA breakout with 30AWG shielding is designed for short-distance internal routing in dense backplanes.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.