We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 50 cm flat SATA data extension cable with black connectors on each end

SMUGDESK

SMUGDESK 50CM SATA 3.0 data extension cable

SKU CH-5VH3-VHZRB

Extends a SATA data connection by 50 cm for tidy 2.5 or 3.5-inch drive wiring inside a desktop case

  • Extends SATA reach with 50cm cable length
  • 6Gbps throughput via SATA 3.0 standard
  • 7-pin connector protects motherboard ports from wear
  • Works with 2.5 and 3.5 inch SATA drives
  • Plug-and-play setup needs no drivers

Product identity

This is a 50 centimetre SATA 3.0 data extension cable built to the SATA 6Gbps standard. It connects a motherboard SATA port to a 2.5 inch or 3.5 inch hard drive or SATA SSD. The cable suits DIY builders and upgraders who need extra reach inside a desktop chassis.

Sustained performance

Internal shielding reduces crosstalk so the link keeps running at the full 6Gbps rate during long copy or backup sessions. The 7-pin connector locks securely, preventing drop-outs caused by vibration or cable movement. No drivers or software are required for stable operation.

Deciding specification

This cable carries data signals only and does not supply power to the drive. Buyers whose storage device needs a separate power connection must provide that from the PSU. Confirm the drive uses a standard SATA data port before ordering.

Highlights

  • Extends SATA reach with 50cm cable length
  • 6Gbps throughput via SATA 3.0 standard
  • 7-pin connector protects motherboard ports from wear
  • Works with 2.5 and 3.5 inch SATA drives
  • Plug-and-play setup needs no drivers

Specifications

No published specifications for this item yet.

Questions about this item

Does the 50 cm SATA 3.0 extension cable add noticeable heat or electrical noise when drives run continuously?

The cable carries only data signals and has no active electronics, so it generates no measurable heat or electrical noise during all-day operation.

What existing connector on my motherboard or drive must be present for this cable to work?

A standard SATA 7-pin data port on both the motherboard and the 2.5 or 3.5 inch drive is required; the cable does not supply power.

Will this extension work reliably with an older SATA II hard drive I plan to keep?

Yes, the cable is backward compatible with SATA II and SATA I devices, so your existing drive will function at its native speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.