We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 50cm cable with four SATA 7-pin connectors branching from one host end

SMUGDESK

SMUGDESK 50cm 4 SATA 7Pin Host to 4 Target Cable

SKU CH-1614-BR73G

Connects one SATA host to four target drives at 6Gbps for RAID arrays and server storage

  • 6Gbps SATA III speed for fast data access
  • One-to-four multi-channel SATA connection expands drive capacity
  • 50cm length enables tidy wiring inside server chassis
  • Anti-interference design maintains stable RAID array signals
  • Data-only cable for server storage and disk array projects

Multi-Channel SATA Cable

This 50cm cable provides a one-to-four SATA 7Pin connection from a single host port to four target drives. It is designed for server storage, industrial systems and hard disk array projects that need multiple drive links from one controller. ||

Data-Only Connection

The cable carries data signals up to the SATA III 6Gbps specification and does not supply power to attached drives. Builders must provide separate power cables for each drive and verify the pin definition matches their controller before installation. ||

Straightforward Internal Routing

The 50cm length fits typical server chassis and storage cabinets without excess slack. Avoid sharp bends or excessive pulling during routing to protect the internal conductors and maintain stable RAID array operation.

Highlights

  • 6Gbps SATA III speed for fast data access
  • One-to-four multi-channel SATA connection expands drive capacity
  • 50cm length enables tidy wiring inside server chassis
  • Anti-interference design maintains stable RAID array signals
  • Data-only cable for server storage and disk array projects

Specifications

No published specifications for this item yet.

Questions about this item

Will the 50 cm cable need replacement if the server chassis is deeper than 50 cm?

The cable length is 50 cm; if the host-to-drive distance exceeds that, a longer cable would be required.

What is the maximum sustained data rate the SATA III 6 Gbps interface can maintain?

The cable complies with the SATA III 6 Gbps specification, so sustained throughput is limited to that rate.

Does the anti-interference shielding prevent heat buildup during all-day RAID operation?

The shielding suppresses electromagnetic interference for signal stability; it does not affect thermal performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.