SMUGDESK
SMUGDESK 5 Port HDMI 2.0b Switch 5 in 1 Out with IR Remote Control 4K@60Hz HDR HDCP 2.2
Connects five HDMI sources to one display with 18 Gbps bandwidth for 4K at 60 Hz, HDR and HDCP 2.2, switched by remote or front button
- Connect five HDMI sources to one display with 5-in-1 switching
- Enjoy 4K@60Hz video through 18Gbps HDMI 2.0b bandwidth
- Experience richer colours with HDR and HDCP 2.2 support
- Switch instantly via IR remote or front-panel button
- Plug-and-play setup with automatic signal detection
Five-Port HDMI 2.0b Switch for Port-Constrained
This compact selector connects up to five HDMI sources to a single screen, solving the common shortage of inputs on televisions, monitors and projectors. It is built for users who regularly swap between consoles, streaming boxes and computers and want to avoid cable wear. Buyers needing more than five simultaneous sources or a matrix output should look elsewhere.
18 Gbps Bandwidth Handles 4K at 60 Hz
The HDMI 2.0b chip delivers stable 4K@60Hz video and remains backward compatible with 1080 and 720 resolutions. HDR and HDCP 2.2 support preserve colour depth and copyright handshakes for protected 4K streams. The link tops out at 18 Gbps, so higher refresh rates or 8K signals are not supported.
Replaces Manual Cable Swapping
The IR remote and front-panel button remove the need to reach behind the display every time you change source. Automatic signal detection speeds up the handshake when a device powers on. The upgrade is worthwhile when port wear or frequent source changes disrupt daily use; it adds no benefit for single-source setups.
Highlights
- Connect five HDMI sources to one display with 5-in-1 switching
- Enjoy 4K@60Hz video through 18Gbps HDMI 2.0b bandwidth
- Experience richer colours with HDR and HDCP 2.2 support
- Switch instantly via IR remote or front-panel button
- Plug-and-play setup with automatic signal detection
Specifications
No published specifications for this item yet.
Questions about this item
Will this HDMI 2.0b switch pass 4K@60Hz HDR from my PS5 to an older 1080p projector?
The switch supports 4K@60Hz and HDR via its HDMI 2.0b 18Gbps bandwidth, and is backward compatible with 1080p and 720p displays, so it will downscale the signal for your projector.
How can I confirm the switch is handling HDCP 2.2 correctly after connecting my Apple TV?
When HDCP 2.2 is active you will see a stable 4K@60Hz picture with HDR colour depth and no black-screen or flicker events during playback of protected content.
Does the box include five HDMI cables for the inputs, or only the switch and remote?
The package contains the 5-port switch unit and an IR remote control; HDMI cables for the five sources and the single output must be purchased separately.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



