We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SMUGDESK

SMUGDESK 4x1 HDMI Switch 4K 60Hz HDR10 HDCP 2.2

SKU CH-KK89-8QF2D

Switches four HDMI sources to one display at 4K 60 Hz with HDR10, HDCP 2.2, YUV444 and RGB888, plus IR remote control

  • Switch four sources to one display with IR remote
  • Enjoy 4K at 60 Hz with HDR10 and HDCP 2.2
  • Get full 4:4:4 chroma and RGB 888 colour accuracy
  • Works instantly with no drivers or software needed
  • Connect consoles, PCs and streamers to any HDTV or monitor

4-Port HDMI Switch for Multi-Source Setups

This HDMI switch connects four source devices to a single display, letting you toggle between them with the included IR remote. It supports 4K resolution at 60Hz along with HDR10, HDCP 2.2, YUV444 and RGB888 colour sampling for high-fidelity video. The unit is fully backward compatible with 1080p and 3D content, and requires no drivers for plug-and-play operation. Ideal for consolidating game consoles, streaming boxes, PCs and Blu-ray players into one tidy connection.

Suited for Users with Four HDMI Sources and One

Buyers who need to route multiple consoles, media players or computers to one TV or monitor will benefit from the four-input design and remote switching. It handles premium formats such as 4K at 60Hz and HDR10 without signal degradation. Users who require more than four inputs, need automatic switching without a remote, or want support for higher refresh rates should consider a different solution. The switch also does not extract or output audio separately from the HDMI stream.

4K 60Hz HDR10 HDCP 2.2 Compliance

The decisive specification is the combination of 4K at 60Hz with HDR10 and HDCP 2.2 support across all four inputs. This ensures compatibility with current-generation consoles, 4K streaming devices and protected content playback. If your display or sources only need 1080p, the switch still works but the headroom goes unused. Verify that your cables and devices match these standards to get the full benefit.

Highlights

  • Switch four sources to one display with IR remote
  • Enjoy 4K at 60 Hz with HDR10 and HDCP 2.2
  • Get full 4:4:4 chroma and RGB 888 colour accuracy
  • Works instantly with no drivers or software needed
  • Connect consoles, PCs and streamers to any HDTV or monitor

Specifications

No published specifications for this item yet.

Questions about this item

Does the IR remote or the switch itself need batteries or firmware updates over time?

The IR remote requires a standard button cell that will need occasional replacement; the switch has no firmware and needs no software updates.

What video bandwidth ceiling limits a 4K 60 Hz HDR signal through this 4-port HDMI switch?

The switch supports 4K at 60 Hz with HDR10 and HDCP 2.2, so the HDMI 2.0 bandwidth ceiling is the limiting factor for that signal.

How much heat does the unit generate when all four inputs run 4K 60 Hz content continuously?

With no internal fan and only passive cooling, the metal enclosure stays warm but within normal operating temperature during all-day 4K 60 Hz use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.