We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four SATA cables and power splitters with locking connectors

SMUGDESK

SMUGDESK 4PCS SATA Cable Set 6.0Gbps Data & Power Splitter

SKU CH-EC89-KEF1N

A four-piece kit supplying SATA 6.0Gbps data cables and Molex-to-dual-SATA power splitters for adding drives

  • 4-in-1 kit covers data and power for storage upgrades
  • SATA III 6.0Gbps bandwidth enables fast SSD and HDD transfers
  • Locking connectors prevent accidental disconnection from chassis vibration
  • 4Pin Molex to dual 15Pin SATA splitter adds two power ports
  • Flexible sheath allows tidy cable routing inside desktop cases

SATA III 6.0Gbps Data & Power Kit

This four-piece set supplies both SATA 3.0 data cables and 4-pin Molex to dual 15-pin SATA power splitters. The data cables comply with the SATA III specification and deliver up to 6.0Gbps bandwidth for 2.5 and 3.5 inch hard drives, solid-state drives and optical drives. Locking latches on the connectors prevent accidental disconnection caused by chassis vibration. Flexible sheathing keeps internal wiring tidy and installation is plug-and-play with no drivers required.

Desktop Storage Expansion

The kit suits DIY builders and upgraders who need to add SATA drives to a desktop PC that still provides Molex power connectors. It solves the common shortage of SATA power ports by turning one Molex output into two 15-pin SATA power feeds. Systems that lack Molex connectors or that use only non-SATA storage interfaces cannot use these cables.

Locking Latch Connectors

The locking latch design on every SATA connector ensures a tight, secure fit inside the case. This single feature prevents loose contacts and data interruptions when the chassis is moved or vibrated. If your build demands vibration-resistant connections, these cables meet that requirement.

Highlights

  • 4-in-1 kit covers data and power for storage upgrades
  • SATA III 6.0Gbps bandwidth enables fast SSD and HDD transfers
  • Locking connectors prevent accidental disconnection from chassis vibration
  • 4Pin Molex to dual 15Pin SATA splitter adds two power ports
  • Flexible sheath allows tidy cable routing inside desktop cases

Specifications

No published specifications for this item yet.

Questions about this item

Should I use the 6.0Gbps data cables or the Molex-to-SATA power splitters for my SSD?

Use both: the SATA 3.0 data cable handles the 6.0Gbps signal link while the 4Pin Molex to 2x15Pin splitter feeds the drive power, so each SSD needs one of each.

What does the 6.0Gbps rating actually deliver when the drive is installed?

The SATA III interface caps the bus at 6.0Gbps; real-world throughput will be lower and depends on the specific SSD or HDD you connect.

Will the 15Pin SATA power plugs work with a standard desktop power supply?

The splitter converts one 4Pin Molex output into two 15Pin SATA power ports, letting you run two drives from a single Molex lead on the PSU.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.