We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with four red SATA ports, gold PCI edge connector, two red SATA cables included

SMUGDESK

SMUGDESK 4 Port PCI SATA RAID Controller Card with 2 SATA Cables

SKU CH-T9ZF-88KAJ

Adds four SATA ports with RAID support to a desktop via PCI and includes two cables

  • Adds four SATA ports with RAID for data protection and speed
  • Includes two SATA cables so drives connect immediately
  • Standard PCI slot fits most traditional desktop motherboards
  • Supports all SATA hard drives and SSDs for storage growth
  • Simple install delivers stable performance for daily office tasks

PCI SATA RAID card for desktop storage

This SMUGDESK controller adds four SATA ports through a standard PCI slot. It supports RAID configuration for data protection and performance improvement. Two SATA cables are included so drives can be connected immediately. The card is designed for older desktop computers that need extra internal storage connections.

Suits owners of legacy PCs with free PCI slots

Builders working on vintage or budget desktops that still provide PCI expansion will find this card a direct fit. It works with any SATA hard drive or SSD for straightforward capacity upgrades. Systems that only offer PCI Express or M.2 slots cannot use this adapter. Users who require hardware RAID acceleration beyond basic levels should consider other solutions.

Four SATA ports via PCI with RAID support

The decisive specification is the four SATA ports delivered through a conventional PCI interface. This determines whether the card physically fits the motherboard and how many drives can be attached. RAID capability adds redundancy or striping options for the connected drives. Compatibility with all SATA HDDs and SSDs makes drive selection flexible.

Highlights

  • Adds four SATA ports with RAID for data protection and speed
  • Includes two SATA cables so drives connect immediately
  • Standard PCI slot fits most traditional desktop motherboards
  • Supports all SATA hard drives and SSDs for storage growth
  • Simple install delivers stable performance for daily office tasks

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the SMUGDESK 4 Port PCI SATA RAID Controller Card, and which step is commonly missed?

Insert the card into a free standard PCI slot on the motherboard, secure the bracket screw, connect the two included SATA cables to the card and drives, then install the RAID driver in the operating system before creating arrays — the driver step is often skipped.

What maintenance or replacement will this controller card need over time?

No scheduled maintenance is required for the card itself; only the connected SATA drives may need replacement as they age, and the two included SATA cables can be swapped if connectors wear or cables are damaged.

What limit appears first when all four SATA ports run heavy sustained transfers?

The standard PCI interface shares a single bus among all four SATA ports, so total bandwidth across simultaneous heavy transfers is constrained by that bus rather than by individual drive speeds.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.