We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
3-foot Mini SAS SFF-8087 cable with straight and right-angle connectors

SMUGDESK

SMUGDESK 3FT Mini SAS SFF-8087 Straight to Right Angle Cable

SKU CH-F0PW-Q2V5E

3 ft internal Mini SAS SFF-8087 straight-to-right-angle cable with locking latches for RAID controllers and server backplanes

  • Right-angle connector fits tight server chassis
  • High-speed SAS transmission for RAID and HBA systems
  • Locking latches prevent vibration-induced disconnection
  • 3-foot length simplifies internal cable routing
  • Multi-layer shielding reduces electromagnetic interference

3 ft SFF-8087 internal cable

This 3 ft Mini SAS cable connects a straight SFF-8087 plug to a right-angle SFF-8087 plug for internal server storage links. It is built for administrators wiring RAID controllers, HBA cards, server backplanes or drive enclosures inside tight chassis. The right-angle end reduces bend stress and keeps airflow clear in dense 24/7 environments.

Right-angle SFF-8087 connector orientation

The single specification that decides fit is the straight-to-right-angle SFF-8087 connector pair. If your controller or backplane only accepts straight plugs on both sides, this cable will not seat correctly. Verify each port style before ordering to avoid clearance conflicts in shallow drive bays or crowded riser cards.

Fits standard server chassis routing

The 3 ft length suits typical internal runs between a RAID card and a backplane without leaving excess slack. Locking latches on both ends resist vibration-induced disconnects during continuous operation. Multi-layer shielding preserves signal integrity for SAS traffic across the link. No drivers are required; the cable is passive and ready for immediate installation.

Highlights

  • Right-angle connector fits tight server chassis
  • High-speed SAS transmission for RAID and HBA systems
  • Locking latches prevent vibration-induced disconnection
  • 3-foot length simplifies internal cable routing
  • Multi-layer shielding reduces electromagnetic interference

Specifications

No published specifications for this item yet.

Questions about this item

What does the SFF-8087 connector do for my SAS RAID controller?

The SFF-8087 connector provides a four-lane SAS link between the RAID controller and the server backplane or drive enclosure.

How does the right-angle end help inside a server chassis?

The right-angle plug routes parallel to the board, saving space in tight chassis and reducing cable bend near the backplane.

What physical space do I need to fit the straight and right-angle plugs?

The straight end needs vertical clearance at the controller; the right-angle end needs side clearance at the backplane, and the 3-foot length suits standard server cases.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.