We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 3.5 inch IDE to SATA adapter card with connectors

SMUGDESK

SMUGDESK 3.5 Inch IDE to SATA Adapter Card

SKU CH-D06W-KQ95C

Converts 3.5-inch IDE drives and optical drives to SATA for use with modern motherboards

  • Convert legacy IDE drives to modern SATA motherboards
  • Standard 3.5-inch form factor fits desktop drive bays
  • Supports IDE hard drives and optical drives
  • Plug-and-play installation requires no driver setup
  • Optimised PCB layout ensures stable data transmission

3.5-Inch IDE-to-SATA Bridge

This adapter card converts a legacy parallel IDE interface to a serial SATA connection. It lets you reuse functional IDE optical drives and 3.5-inch IDE hard drives on motherboards that lack native IDE ports. The board mounts in a standard 3.5-inch drive bay for a tidy internal installation.

Plug-and-Play Signal Conversion

No driver installation is required; the operating system identifies the connected IDE device automatically after the hardware connection is made. The design supports normal read and write operations for compatible IDE CD-ROM, DVD-ROM, and mechanical hard drives. An optimized PCB layout minimizes electromagnetic interference to maintain stable bidirectional data transmission.

Upgrade Path for Legacy Storage

This replaces the need for a motherboard with an onboard IDE controller or a separate PCI IDE expansion card. The jump is worthwhile when you have working IDE drives or optical media to access but your current or planned motherboard only provides SATA ports. It is not suited for users needing to connect SATA drives to an IDE-only system or for laptop 2.5-inch IDE drives without a separate bracket.

Highlights

  • Convert legacy IDE drives to modern SATA motherboards
  • Standard 3.5-inch form factor fits desktop drive bays
  • Supports IDE hard drives and optical drives
  • Plug-and-play installation requires no driver setup
  • Optimised PCB layout ensures stable data transmission

Specifications

No published specifications for this item yet.

Questions about this item

Should I choose this 3.5-inch adapter or a different form factor for my desktop case?

The adapter uses a standard 3.5-inch mounting frame that fits directly into a desktop hard-drive bay, so no extra brackets are needed.

What transfer speed will I actually see when I connect an old IDE drive through this card?

The adapter bridges parallel IDE to serial SATA, so real-world throughput is limited by the IDE drive itself — typically well below the SATA interface ceiling.

Does this converter use a standard SATA interface, and what does that limit in practice?

It presents a regular SATA data port to the motherboard, meaning the connection is capped by the legacy IDE device’s own maximum transfer rate.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.