We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 3.3FT SAS cable with SFF-8087 and SFF-8643 connectors

SMUGDESK

SMUGDESK 3.3FT Mini SAS 4i SFF-8087 to Mini SAS HD SFF-8643 Cable

SKU CH-WRZM-QZAPS

Internal cable links RAID controllers or HBAs to drive backplanes using SFF-8087 and SFF-8643 connectors over 3.3 ft of shielded SAS wiring

  • 3 ft length fits tight server chassis
  • SFF-8087 to SFF-8643 links RAID controllers to backplanes
  • Multi-layer shielding cuts crosstalk for stable SAS throughput
  • Flexible jacket eases routing in compact enclosures
  • Built to SAS specs for enterprise storage reliability

Server SAS Cable

This 3.3FT internal cable connects a Mini SAS 4i SFF-8087 host controller or RAID card to a Mini SAS HD SFF-8643 backplane or storage device. It is built for server, workstation and storage enclosure installations where a direct internal link is required. The cable serves administrators and integrators assembling or expanding enterprise storage systems. Buyers who need an external connection or a different connector pairing should verify their hardware first.

Thermals Noise Power

The fully shielded construction suppresses electromagnetic interference and signal crosstalk during high-speed SAS transmission. Stable data throughput is maintained without the errors that excess noise can introduce. As a passive copper assembly it draws no power and adds no audible noise to the chassis. No active cooling or power budget is required for the cable itself.

Build Connectors

A flexible outer jacket allows easy routing inside compact server cabinets without sharp bending damage. The male SFF-8087 and male SFF-8643 ends lock securely into standard internal ports on RAID controllers, HBAs and drive backplanes. Multi-layer shielding and high-performance conductors are designed to meet SAS industry specifications for reliable daily operation. This cable is intended for permanent internal wiring only.

Highlights

  • 3 ft length fits tight server chassis
  • SFF-8087 to SFF-8643 links RAID controllers to backplanes
  • Multi-layer shielding cuts crosstalk for stable SAS throughput
  • Flexible jacket eases routing in compact enclosures
  • Built to SAS specs for enterprise storage reliability

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 3.3FT SFF-8087 to SFF-8643 cable inside a server chassis?

Route the flexible jacket between the RAID controller SFF-8087 port and the backplane SFF-8643 port, securing each latch fully; the common mistake is leaving a connector partially seated, which causes link errors.

What maintenance or replacement will this internal SAS cable need over time?

No scheduled maintenance is required; replace the cable only if the shielding is kinked, the latch tabs break, or intermittent drive drops appear during drive swaps.

What limit appears first when this cable runs sustained high-speed SAS traffic?

The 3.3FT length caps the maximum reach between controller and backplane; signal integrity holds at full SAS speeds within that distance, so distance is the first constraint.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.