We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
3.2 ft Mini SAS HD SFF-8643 to SFF-8087 cable, shielded jacket, locking connectors

SMUGDESK

SMUGDESK 3.2 ft Mini SAS HD SFF-8643 to SFF-8087 cable

SKU CH-5ADX-W1236

Connects SAS RAID controllers to legacy storage backplanes with shielded 3.2 ft cable and secure latching connectors

  • Connects modern SFF-8643 controllers to legacy SFF-8087 backplanes
  • Multi-layer shielding suppresses EMI and crosstalk in dense chassis
  • Secure latching connectors resist vibration-induced disconnection
  • Flexible jacket enables tidy routing in tight server space
  • Compatible with Supermicro, Dell, HP and Lenovo systems

Internal SAS HD interconnect

The SMUGDESK 3.2 ft cable connects an SFF-8643 male port on a modern SAS RAID controller to an SFF-8087 male port on a legacy storage backplane or drive enclosure. It bridges newer Mini SAS HD host adapters with older SFF-8087 equipment, enabling storage upgrades without replacing the entire subsystem. The assembly is built for internal server wiring where space and signal integrity both matter.

Shielded signal path

Multi-layer shielding suppresses electromagnetic interference and crosstalk from adjacent power cables and dense chassis hardware. This preserves consistent data transmission under continuous heavy load inside packed server cabinets. Precision-moulded locking latches secure each connector against vibration-induced disconnection during long-term operation.

Flexible routing aid

The pliable jacket allows tidy cable management through tight internal routing channels without stressing conductors. It suits server reconstruction, storage expansion, data-centre deployment and DIY high-performance storage builds. Buyers needing a different connector gender, a longer reach or an external bulkhead variant will require a separate cable assembly.

Highlights

  • Connects modern SFF-8643 controllers to legacy SFF-8087 backplanes
  • Multi-layer shielding suppresses EMI and crosstalk in dense chassis
  • Secure latching connectors resist vibration-induced disconnection
  • Flexible jacket enables tidy routing in tight server space
  • Compatible with Supermicro, Dell, HP and Lenovo systems

Specifications

No published specifications for this item yet.

Questions about this item

How do I route the 3.2 ft Mini SAS HD cable inside a server chassis without stressing the SFF-8643 or SFF-8087 connectors?

Lay the cable along existing cable channels, avoid sharp bends near the connectors, and engage the locking latches on both SFF-8643 and SFF-8087 ends until they click.

What maintenance or replacement will the SFF-8643 to SFF-8087 cable need over time?

Inspect the multi-layer shielding and latch tabs during hardware swaps; replace the cable if the jacket shows cuts or the latches no longer hold firmly.

What limit appears first on this SFF-8643 to SFF-8087 link under sustained heavy data load?

The 3.2 ft length and multi-layer shielding are designed to maintain signal integrity, so the practical limit will be the connected RAID controller or backplane throughput.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.