We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular adapter enclosure with SATA connector and slots for M.2 BKey and mSATA drives

SMUGDESK

SMUGDESK 2in1 M.2 BKey & mSATA to SATA 3.0 Adapter Enclosure

SKU CH-DGYP-8DA6D

Converts M.2 BKey SATA and mSATA SSDs to standard SATA 3.0 with 6Gbps transfer speed

  • Converts M.2 B-Key and mSATA SSDs to SATA 3.0
  • Dual-drive compatibility simplifies storage upgrades
  • 6 Gbps transfer speed via SATA Revision 3.2
  • Compact enclosure fits standard drive bays
  • Plug-and-play support for Windows and Linux

Dual-Protocol Adapter for Legacy SSDs

This enclosure accepts either an M.2 NGFF B-key SATA SSD or an mSATA SSD and presents it as a standard SATA 3.0 device. It targets users who need to connect older drive formats to desktop motherboards, laptop bays or external docks that only provide SATA ports. The adapter is new and requires no drivers for Windows or Linux systems.

Sustained 6Gbps Throughput

The bridge chip maintains the full SATA Revision 3.2 link rate during extended transfers rather than throttling after a short burst. Sequential reads and writes stay consistent across large files because the signal path is kept short inside the compact housing. No active cooling is needed to sustain this performance level.

Passive Thermal Design

The aluminium-alloy shell acts as a heatsink, dissipating drive warmth without a fan so the unit stays silent in normal use. Power draw is limited to the drive itself plus the bridge circuitry, both fed from the host SATA connector. Temperatures remain within safe limits for typical office or home workloads.

Highlights

  • Converts M.2 B-Key and mSATA SSDs to SATA 3.0
  • Dual-drive compatibility simplifies storage upgrades
  • 6 Gbps transfer speed via SATA Revision 3.2
  • Compact enclosure fits standard drive bays
  • Plug-and-play support for Windows and Linux

Specifications

No published specifications for this item yet.

Questions about this item

How much heat does the adapter generate when a SATA SSD runs continuously inside it?

The compact enclosure has no active cooling; it relies on the drive's own thermal limits and the host system's airflow.

What host connection must my computer provide for this adapter to work?

A standard SATA 3.0 data port and a matching SATA power connector are required.

Will a SATA Revision 3.0 drive work at full speed when connected through this adapter?

Yes, the adapter follows the SATA Revision 3.2 specification and passes through the 6Gbps link without throttling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.