We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 24-pin ATX to 6-pin power adapter cable, 33cm long, black connectors on black sleeved wire

SMUGDESK

SMUGDESK 24 Pin to 6 Pin ATX Power Adapter Cable 33cm

SKU CH-J7MJ-S97Y4

Converts a standard 24-pin ATX supply to the proprietary 6-pin motherboard connector used in HP Z220, Z230, ProDesk 600 G1, EliteDesk 800 G1 and Compaq 4000, 6005, 8300 desktops.

  • Converts standard 24-pin ATX to proprietary 6-pin HP motherboard power
  • Fits HP Z220 Z230 ProDesk 600 G1 EliteDesk 800 G1 Compaq 4000 6005 8300
  • 33cm length enables tidy routing inside SFF MT tower chassis
  • High-purity copper conductors ensure stable power delivery and prevent startup failures
  • Exact pin assignment allows plug-and-play PSU upgrades without soldering

Purpose and compatibility

This adapter converts a standard 24-pin ATX power connector to the proprietary 6-pin motherboard socket used in specific HP business desktops. It enables an aftermarket PSU upgrade for the Z220, Z230, ProDesk 600 G1, EliteDesk 800 G1, Compaq 4000, 6005 and 8300 models. Builders who need a different pin count or a different vendor's proprietary layout cannot use this cable.

Interface constraints

The cable bridges a standard 24-pin ATX supply and a 6-pin motherboard header, so it only works where that exact 6-pin pinout is present. It does not adapt to 4-pin, 8-pin or any other non-standard motherboard power socket. Length is fixed at 33 centimetres, which limits routing options in larger tower chassis or when the PSU sits far from the motherboard connector.

Installation notes

Installation is plug-and-play: connect the 24-pin end to the ATX power supply and the 6-pin end to the motherboard. No soldering or pin rearrangement is required. The main risk is ordering the wrong cable for a model that looks similar but uses a different proprietary pinout; always verify the exact HP model number before purchase.

Highlights

  • Converts standard 24-pin ATX to proprietary 6-pin HP motherboard power
  • Fits HP Z220 Z230 ProDesk 600 G1 EliteDesk 800 G1 Compaq 4000 6005 8300
  • 33cm length enables tidy routing inside SFF MT tower chassis
  • High-purity copper conductors ensure stable power delivery and prevent startup failures
  • Exact pin assignment allows plug-and-play PSU upgrades without soldering

Specifications

No published specifications for this item yet.

Questions about this item

Which HP desktop models does this 24-pin to 6-pin adapter cable support?

The adapter fits HP Z220, Z230 SFF, MT and TWR, ProDesk 600 G1, EliteDesk 800 G1 and Compaq 4000, 6005 and 8300 desktops. Verify your exact model before ordering to ensure the proprietary 6-pin motherboard socket matches.

What does the 33 cm length mean when routing the cable inside a chassis?

At 33 cm (13 inches) the cable reaches from a standard ATX power supply to the motherboard 6-pin socket in small-form-factor, mini-tower and full-tower cases, allowing tidy routing without strain on the connectors.

How does the 24-pin ATX to 6-pin interface affect power delivery?

The adapter carries the standard ATX 24-pin supply voltages through high-purity copper conductors to the HP-specific 6-pin motherboard header, preserving the original pin assignment so the board receives the correct rails without modification.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.