We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two XT60 female to DC 5.5mm x 2.5mm female adapter cables

SMUGDESK

SMUGDESK 2 Pack XT60 Female to DC 5.5mm x 2.5mm Female Power Adapter Cable

SKU CH-25C6-CH2AT

A twin-pack of XT60-to-barrel-jack cables powers TS100 irons and FPV monitors from lithium packs with low-loss copper conductors

  • Two cables included for backup and multi-device use
  • Converts XT60 battery packs to standard DC 5.5mm × 2.5mm barrel jack
  • Powers TS100 soldering iron and FPV monitors directly from XT60 source
  • High-conductivity copper wire with molded connectors reduces voltage drop and heat
  • Flexible, lightweight cable resists bending fatigue for field and outdoor work

Two-Pack XT60-to-DC Adapter Cable

This pack contains two XT60 female to DC 5.5mm x 2.5mm female power adapter cables. They convert an XT60 battery connector into a standard barrel jack for portable DC devices. The cables are built with high-conductivity copper wire and moulded connectors for stable power delivery. Lightweight and flexible, they suit field maintenance, RC projects and outdoor soldering work.

For TS100 Owners and FPV Pilots

The adapter is designed for users powering a TS100 soldering iron, FPV monitor or similar portable gear from XT60 lithium packs. It only transmits power and does not support data transfer. Buyers whose devices use a different DC barrel size or require a data-capable connection should look elsewhere. It also does not suit applications needing a male XT60 or male barrel plug.

Plug-and-Play with Polarity Check

Installation is straightforward: plug the XT60 end into the battery and the DC jack into the device. No tools or soldering are required. The most common issue is mismatched barrel dimensions; verify the device port is 5.5mm outer by 2.5mm inner before connecting. Ensure correct polarity alignment to avoid damage.

Highlights

  • Two cables included for backup and multi-device use
  • Converts XT60 battery packs to standard DC 5.5mm × 2.5mm barrel jack
  • Powers TS100 soldering iron and FPV monitors directly from XT60 source
  • High-conductivity copper wire with molded connectors reduces voltage drop and heat
  • Flexible, lightweight cable resists bending fatigue for field and outdoor work

Specifications

No published specifications for this item yet.

Questions about this item

What DC barrel-jack size must my device already have to use this XT60 adapter?

The cable ends in a 5.5 mm outer and 2.5 mm inner barrel jack, so your device must accept that exact plug.

Can I keep my existing XT60 lithium battery packs and simply add this cable to power a TS100 soldering iron?

Yes, the adapter converts the XT60 connector to the DC barrel jack the TS100 requires, letting you reuse the same packs.

After plugging the cable into my battery and FPV monitor, how can I confirm it is delivering power correctly?

The monitor should power on immediately with no flicker, indicating stable current through the high-conductivity copper wire and tight connectors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.