We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 0.5m Mini SAS SFF-8087 to four SFF-8482 breakout cables with SATA power connectors

SMUGDESK

SMUGDESK 2 Pack .5M SFF-8087 to 4 SFF-8482 Mini SAS Breakout Cable with SATA Power Supply

SKU CH-TCNH-4MEH4

Two 0.5m Mini SAS breakout cables split one SFF-8087 port into four SFF-8482 drive connectors with integrated SATA power for 2.5-inch and 3.5-inch SAS/SATA drives

  • 2-pack provides spare cables for server multi-disk wiring and backup replacement
  • SFF-8087 input splits to four SFF-8482 ports for direct SAS/SATA drive connection
  • Integrated SATA power adapter delivers drive power without extra cords for simpler internal wiring
  • 5m (1.6FT) short length keeps chassis cables tidy and improves airflow
  • Enterprise-grade shielding with high-purity copper ensures stable transmission for RAID and storage arrays

Server Storage Cabling

This two-pack provides 0.5m Mini SAS breakout cables that connect a single SFF-8087 port to four SFF-8482 drive interfaces. Each cable includes an integrated SATA power connector to supply attached drives directly. The set suits server builders and IT administrators wiring multi-disk arrays or keeping spare cables for maintenance.

Signal Integrity and Airflow

Professional multi-layer shielding and high-purity copper conductors resist electromagnetic interference and reduce signal attenuation during sustained high-load operation. The 1.6ft length keeps internal routing tidy, which improves chassis airflow and helps lower drive and motherboard temperatures.

Direct Drive Attachment

Cables plug into SAS RAID cards, HBA adapters or disk backplanes and break out to 2.5-inch and 3.5-inch SAS or SATA mechanical drives and SSDs. The onboard SATA power feed removes the need for separate power cords, simplifying the internal wiring structure. Buyers needing longer runs or different connector types will require alternative cables.

Highlights

  • 2-pack provides spare cables for server multi-disk wiring and backup replacement
  • SFF-8087 input splits to four SFF-8482 ports for direct SAS/SATA drive connection
  • Integrated SATA power adapter delivers drive power without extra cords for simpler internal wiring
  • 5m (1.6FT) short length keeps chassis cables tidy and improves airflow
  • Enterprise-grade shielding with high-purity copper ensures stable transmission for RAID and storage arrays

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the SFF-8087 plug and the SATA power lead without bending the 0.5m cable too sharply?

Route the SFF-8087 end to the RAID card or HBA first, then fan out the four SFF-8482 tails to each drive bay; attach the SATA power connector to the PSU before seating the drives so the short 1.6ft length stays relaxed and does not kink.

Which parts of this breakout cable will wear out first and need replacing?

The SFF-8482 drive-side connectors and the SATA power plug see repeated mating cycles during drive swaps; the 0.5m cable jacket and shielding are fixed, so only the connector contacts degrade over time.

At what point does the 0.5m length become the limiting factor in a full chassis?

In a deep server the 1.6ft reach may fall short from a top-mounted HBA to lower drive bays, forcing cable extensions that add insertion loss before signal quality or power delivery becomes the bottleneck.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.