We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 1-meter Mini SAS SFF-8087 to four SATA breakout cables

SMUGDESK

SMUGDESK 2 Pack 1M SFF-8087 Mini SAS to SATA Breakout Cable

SKU CH-S17N-DPD9F

Two 1-metre SFF-8087 Mini SAS cables each split one SAS port into four SATA connectors for 2.5 or 3.5-inch drives

  • Connect four drives from one SAS port
  • Two cables included for multi-server builds
  • 1 metre length keeps server wiring tidy
  • Shielded design maintains 6Gbps signal integrity
  • Forward breakout layout matches RAID HBA pinouts

Two-pack Mini SAS breakout cables

This two-pack supplies two 1-meter SFF-8087 Mini SAS to SATA breakout cables for internal server wiring. Each cable splits a single SFF-8087 male connector into four independent SATA data ports, allowing one SAS channel to drive four drives. The forward breakout layout follows standard pin assignment for direct attachment to RAID HBA cards or motherboard Mini SAS ports. Fully shielded construction supports stable 6Gbps SAS and SATA transmission.

Suits RAID and JBOD storage builds

These cables suit administrators wiring RAID controller cards, JBOD enclosures or NAS systems that use SFF-8087 ports and SATA hard drives or SSDs. The 1-meter length fits typical rackmount and ATX chassis layouts while keeping airflow paths clear. Builders who need more than four drives per SAS channel or who require a different connector type should select another cable.

SFF-8087 to four SATA breakout

The decisive specification is the SFF-8087 male to four SATA forward breakout wiring. This exact pinout matches standard RAID HBA and backplane interfaces, preventing drive non-recognition or array degradation caused by reverse-wired alternatives. Each of the four SATA branches operates independently at up to 6Gbps for 3.5-inch or 2.5-inch drives.

Highlights

  • Connect four drives from one SAS port
  • Two cables included for multi-server builds
  • 1 metre length keeps server wiring tidy
  • Shielded design maintains 6Gbps signal integrity
  • Forward breakout layout matches RAID HBA pinouts

Specifications

No published specifications for this item yet.

Questions about this item

What speed does the SFF-8087 Mini SAS to SATA breakout cable support in practice?

The cable supports SATA III 6Gbps maximum transfer speed for stable 24/7 transmission across each of the four SATA branches.

What drive bays and chassis clearances does the 1-meter forward breakout cable fit?

The 1 meter (3.3FT) length fits standard ATX, rackmount server and storage cabinet internal layouts for 3.5/2.5-inch HDD/SSD and hot-swap trays.

How do I install the forward breakout cable on a RAID HBA card without causing drive dropouts?

Connect the single SFF-8087 male plug to the SAS RAID HBA or motherboard Mini SAS port; the forward pinout matches industry-standard assignment to prevent disk unrecognition.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.