We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 1-metre Mini SAS HD cables each splitting to four SATA connectors

SMUGDESK

SMUGDESK 2 Pack 1 Meter SFF-8643 Mini SAS HD to 4 SATA Forward Breakout Cable

SKU CH-BKRA-QKMWD

Two 1-metre SFF-8643 Mini SAS HD cables each split to four SATA 2.0/3.0 ports for multi-drive server expansion

  • Connect four SATA drives per controller with SFF-8643 breakout
  • Two cables included for multi-drive expansion and cost saving
  • 3FT length enables flexible routing inside chassis
  • Shielded construction reduces interference for stable operation
  • Supports SATA 2.0 and 3.0 drives for broad compatibility

Two-pack 1-meter Mini SAS HD breakout cables

This two-pack supplies two 1-metre SFF-8643 Mini SAS HD to four SATA forward breakout cables. Each cable splits a single Mini SAS HD port on a RAID card, HBA or storage controller into four independent SATA connections for hard drives or solid-state drives. The 3.3-foot length suits internal wiring in desktop workstations, small servers, NAS units and DIY storage builds. Shielded construction reduces electromagnetic interference for stable data transfer under continuous load.

Suits builders expanding internal SATA storage via

These cables are aimed at administrators and enthusiasts adding multiple SATA drives through a Mini SAS HD controller. They support SATA 2.0 and 3.0 drives and require no driver installation for plug-and-play operation. Not suited for setups needing external cabling, a different Mini SAS connector type, or more than four drives per port. The forward breakout wiring follows the standard pinout for mainstream controllers.

SFF-8643 Mini SAS HD to four SATA forward breakout

The decisive specification is the SFF-8643 Mini SAS HD connector on the host side breaking out to four standard SATA data ports. This exact interface match determines whether the cable fits your RAID card, HBA or storage controller. Each cable in the pack provides one Mini SAS HD plug and four SATA receptacles, enabling a direct 1-to-4 drive connection without adapters.

Highlights

  • Connect four SATA drives per controller with SFF-8643 breakout
  • Two cables included for multi-drive expansion and cost saving
  • 3FT length enables flexible routing inside chassis
  • Shielded construction reduces interference for stable operation
  • Supports SATA 2.0 and 3.0 drives for broad compatibility

Specifications

No published specifications for this item yet.

Questions about this item

Does the 2-pack include both SFF-8643 and SATA connectors or do I need separate adapters?

The 2-pack supplies two complete cables; each has an SFF-8643 Mini SAS HD plug on one end and four SATA plugs on the other, so no extra adapters are required.

Should I choose the 1 metre version or a different length for a typical server chassis?

The 1 metre (3.3FT) length is designed for internal wiring in desktop workstations, small servers and NAS devices, giving enough reach without excess slack.

What transfer rate will I see when the cable connects a RAID card to four SATA 3.0 SSDs?

The cable follows the forward breakout standard and supports SATA 2.0/3.0 drives, so each attached SSD can run at its native 3.0 speed through the host controller.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.