We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow metal bracket with power and data cables

SMUGDESK

SMUGDESK 2.5" to 3.5" Hard Drive Adapter Yellow

SKU CH-5DE3-5BH7K

Metal bracket mounts a 2.5-inch SSD or HDD into a 3.5-inch bay with included SATA 3.0 data cable and IDE 4Pin to 15Pin power adapter

  • Sturdy metal bracket fits 2.5-inch drives into 3.5-inch bays
  • Complete kit includes IDE 4Pin to SATA 15Pin power cable and SATA 3.0 data cable
  • SATA 3.0 standard delivers fast read and write speeds for SSDs and HDDs
  • Precise mounting holes secure the drive and reduce vibration during operation
  • Universal compatibility suits desktop PCs, DIY workstations and small server upgrades

2.5-Inch to 3.5-Inch Drive Bracket

This yellow metal bracket converts a 2.5-inch SSD or laptop hard drive for installation in a standard 3.5-inch desktop drive bay. The sturdy construction provides stable support and aids heat dissipation to reduce vibration during operation. A complete accessory kit includes an IDE 4-pin to SATA 15-pin power cable and a SATA 3.0 data cable for immediate setup.

Suits DIY Upgrades and Server Builds

The adapter targets enthusiasts upgrading older desktops, building custom workstations, or expanding small server storage with 2.5-inch drives. Buyers who need to install a 3.5-inch drive into a 2.5-inch bay, or who require tool-less mounting mechanisms, should look at a different solution.

SATA 3.0 Data Interface Support

The included data cable adheres to the SATA 3.0 transmission standard to enable high-speed reading and writing for connected solid-state or mechanical drives. Verifying that the host system provides a compatible SATA port and sufficient physical clearance inside the chassis confirms this is the correct part.

Highlights

  • Sturdy metal bracket fits 2.5-inch drives into 3.5-inch bays
  • Complete kit includes IDE 4Pin to SATA 15Pin power cable and SATA 3.0 data cable
  • SATA 3.0 standard delivers fast read and write speeds for SSDs and HDDs
  • Precise mounting holes secure the drive and reduce vibration during operation
  • Universal compatibility suits desktop PCs, DIY workstations and small server upgrades

Specifications

No published specifications for this item yet.

Questions about this item

Does the yellow metal bracket include the exact screw-hole pattern for a standard 3.5-inch drive bay?

Yes, the bracket uses the precise mounting-hole layout for a standard 3.5-inch bay so the 2.5-inch SSD or HDD secures with normal case screws.

What is the correct order to connect the IDE 4-pin to SATA 15-pin power cable and the SATA 3.0 data cable during installation?

Mount the drive in the bracket first, attach the SATA data cable to the drive, then plug the IDE 4-pin end into the PSU and the SATA 15-pin end into the drive.

Will the included SATA 3.0 data cable need replacement if I later move the drive to a newer motherboard?

No, the SATA 3.0 cable is backward and forward compatible with all SATA revisions, so it works with future motherboards without replacement.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.