We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Open metal bracket converting a 2.5 SATA drive to a 3.5 bay

SMUGDESK

SMUGDESK 2.5" SATA SSD/HDD to 3.5" Mount Adapter Bracket

SKU CH-3NZC-HGP4P

Mounts a 2.5 SATA SSD or HDD into a standard 3.5 drive bay with screw-on brackets and open-frame airflow

  • Converts 2.5" SATA drives for standard 3.5" desktop bays
  • Simple screw-in mounting secures drives in PC chassis
  • Pre-drilled holes fit most 2.5" SATA SSD and HDD models
  • Open frame design improves airflow for better heat dissipation
  • Purely mechanical adapter needs no drivers or extra cables

2.5" SATA to 3.5" Bay Adapter

This SMUGDESK bracket converts a 2.5 inch SATA SSD or HDD for secure installation in a standard 3.5 inch desktop drive bay. It provides a purely mechanical mounting solution that requires no drivers or additional software. The open-frame design promotes air circulation around the drive to assist with heat dissipation during extended use. Standard screws fasten the drive to the bracket before the assembly is mounted in the chassis.

Desktop PC builders and storage upgraders

The adapter suits anyone adding a laptop-size SATA drive to a desktop case with an available 3.5 inch internal bay. It is not suitable for drives using interfaces other than SATA, nor for cases that only offer 2.5 inch mounting points. Buyers needing to connect the drive will have to supply their own SATA data and power cables separately.

SATA interface requirement

Confirm that your 2.5 inch drive uses a SATA interface before purchasing this bracket. The mounting holes are optimised for mainstream SATA SSD and HDD models to ensure correct alignment. No cables or electronic components are included with the adapter.

Highlights

  • Converts 2.5" SATA drives for standard 3.5" desktop bays
  • Simple screw-in mounting secures drives in PC chassis
  • Pre-drilled holes fit most 2.5" SATA SSD and HDD models
  • Open frame design improves airflow for better heat dissipation
  • Purely mechanical adapter needs no drivers or extra cables

Specifications

No published specifications for this item yet.

Questions about this item

Does the bracket include the SATA data and power cables I need to connect my 2.5 inch drive?

No, the bracket is a purely mechanical mount; you must supply your own SATA data cable and power cable to connect the drive to the motherboard and power supply.

My 2.5 inch SSD has mounting holes on the bottom and on the sides; will the hole layout on this bracket match both patterns?

The bracket has a predrilled hole layout designed to fit most mainstream 2.5 inch SATA SSDs and HDDs, covering the common bottom and side mounting positions.

Will my 2.5 inch SATA drive overheat inside a closed 3.5 inch bay when mounted on this open frame bracket?

The openstyle frame improves air circulation around the drive, helping to dissipate heat and avoid overheating during long operation inside the chassis bay.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.