We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with two HDMI ports on one side and one on the other, manual switch button on top

SMUGDESK

SMUGDESK 2×1 HDMI 2.1 Switch Selector 8K@60Hz 4K@120Hz 48Gbps

SKU CH-YPQY-BVVQM

Connect two HDMI 2.1 sources to one display with 48Gbps bandwidth, supporting 8K@60Hz, 4K@120Hz, HDR10+ and HDCP 2.3 via manual switching

  • Switch two HDMI 2.1 sources to one display
  • 48 Gbps bandwidth carries 8K 60 Hz and 4K 120 Hz
  • HDR10+ and HDCP 2.3 pass through protected media
  • Lossless multichannel audio travels with video unchanged
  • Manual button toggles inputs instantly with no drivers needed

Two-source HDMI 2.1 switcher

This HDMI 2.1 selector routes signals from two sources to a single display. It handles 48Gbps bandwidth for 8K@60Hz and 4K@120Hz video with HDR10+ and HDCP 2.3 support. Gamers and home-theatre users can keep consoles and players connected simultaneously.

Manual button, no drivers required

Press the front switch to toggle between inputs instantly. The unit is plug-and-play with no software installation needed. Use certified HDMI 2.1 cables for full bandwidth; older cables will limit resolution and refresh rate.

Verify source, cable and display compliance

Your source devices, cables and display must all support HDMI 2.1 to reach 8K@60Hz or 4K@120Hz. This switcher passes signals through without upscaling or conversion. It does not suit setups needing automatic switching or more than two inputs.

Highlights

  • Switch two HDMI 2.1 sources to one display
  • 48 Gbps bandwidth carries 8K 60 Hz and 4K 120 Hz
  • HDR10+ and HDCP 2.3 pass through protected media
  • Lossless multichannel audio travels with video unchanged
  • Manual button toggles inputs instantly with no drivers needed

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the switch is passing 8K@60Hz or 4K@120Hz correctly after connecting my sources and display?

Check your display's on-screen information menu; it should report the incoming signal as 8K at 60 Hz or 4K at 120 Hz with HDR active, confirming the full 48 Gbps link is established end-to-end.

What cables and accessories are included, and what must I provide separately to reach the rated performance?

The box contains only the switch unit itself; you need three HDMI 2.1 certified cables (two from sources to the switch inputs, one from the switch output to the display) to achieve 8K@60Hz or 4K@120Hz.

The page lists a single 2×1 model — are there other port-count or bandwidth versions I should consider instead?

Only this 2-input 1-output 48 Gbps version is offered; if you need more inputs or a different form factor, you would have to select a different product line altogether.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.